PRODUCT SPECIFICATIONS The X7 prints industrial-grade manufacturing jigs, jaws, tools, fixtures, and end-use parts. Designed from the ground up to survive the production floor environment and capable of printing parts stronger than machined aluminum for a fraction of the cost, the X7 delivers unparalleled surface finish, build size, and reliability. Accelerate part production with Turbo Print, our fastest print mode, and verify dimensional accuracy with Blacksmith adaptive manufacturing technology — only available on the X7. Printer Properties Fused Filament Fabrication, Continuous Filament Fabrication Build Volume Machine Footprint Kinematic coupling — flat to within 80 μm In-process inspection, active print calibration, bed leveling Extrusion System Second-generation extruder, out-of-plastic and out-of-fiber detection Operating Band 2.4 GHz Wi-Fi Standards 802.11 b/g/n Plastics Available Onyx, Onyx FR, Onyx ESD, Nylon White Fibers Available Carbon fiber, fiberglass, Kevlar®, HSHT fiberglass Tensile Strength Tensile Modulus Part Properties Layer Height 100 μm default, 50 μm minimum, 250 µm maximum Closed cell infill: multiple geometries available Eiger Cloud Slicer, part / build management (other options available at cost) Two-factor authentication, org admin access, single sign-on Adaptive manufacturing platform (additional purchase required) FRONT VIEW SIDE VIEW * Continuous carbon fiber data. Note: All specifications are approximate and subject to change without notice. REV 4.5 - 2021/03/04