CONTROL EQUIPMENT
16Pages

{{requestButtons}}

Catalog excerpts

CONTROL EQUIPMENT - 1

CONTROL EQUIPMENT Mark takes care of it for you! Devices can be regulated and controlled in various ways. Each individual will have his own ideas and requirements. Mark has thus developed a range of options from standard to projectspecific. Our range includes various types of thermostats, speed controllers, packaged digital controllers and full custom made power and control panels, enabling the user to control a single unit or multiple units. New in our range are the thermostats and controllers controlled via Internet (web-based). This allows remote connection with the thermostat via a web browser or mobile app. For example, you can operate or change the thermostat anywhere in the world with a telephone, tablet or laptop / PC. Our range consists of: –  range of thermostats and sensors Full – Time controls –  Digital time and temperature controllers –  Speed controllers including variable speed drives (VSD) –  Custom-made power and control panels Mark has its own electrical engineering and manufacturing department and is therefore able to offer a solution for any control requirement. Our engineers would be pleased to advise you. Simply contact them to discuss the options within our range of cont

Open the catalog to page 1
CONTROL EQUIPMENT - 2

(Room) thermostats and time switches 230 V ROOM THERMOSTAT WITH S ELECTOR, RESET BUTTON AND FAILURE LIGHT A room thermostat for 1 to 1 control of a device based on room temperature. An extensive room thermostat with summer/winter switch, failure alert and reset button thermostat for 1 to 1 control of a device based on room temperature. A digital clock thermostat for 1 to 1 control of a device based on room temperature. Specifications: – Required temperature adjustable from 10…30°C. –  witch contact voltage free max. 4A / 230V. S Specifications: –  Required temperature adjustable from...

Open the catalog to page 2
CONTROL EQUIPMENT - 4

(Room) thermostats and time switches WATER-PROOF ROOM THERMOSTAT The OptiTherm+ is a digital clock thermostat with internal room sensor with which 1 or more air heaters (type GS+), up to a maximum of 8, can be controlled on the basis of the room temperature by means of a bus system. Water resistant (IP65) room thermostat with adjustable differential. Measures the temperature using a sensor filled with liquid connected to the thermostat with a capillary. Specifications: –  Push-button for switching the heating mode on and off. –  Push-button for switching the fan of the air heater(s) on and...

Open the catalog to page 4
CONTROL EQUIPMENT - 5

CHRONOTHERM TOUCH (MODULATING THERMOSTAT) ROOM THERMOSTAT WITH SPEED CONTROL PIPE THERMOSTAT A programmable, modulating clock thermostat for modulating boilers, that control according to the OpenTherm®-communication protocol, as Mark EcoFlex, PowerFlex, MegaFlex and MaxiFlex. Operation is extremely easy through the touch screen. Programmable room thermostat for speed control of appliances with an EC motor. Thermostat to start a water-supplied air heater, for example, when the water is at the required temperature. Specifications: –  Display: large touch screen with backlight. – The touch...

Open the catalog to page 5
CONTROL EQUIPMENT - 6

(Room) thermostats and time switches FROST PROTECTION THERMOSTAT DIGITAL TIME CLOCK TEMPERATURE REGULATOR BLACK BULB Thermostat to protect against the danger of frost. Equipped with a bulb sensor which is active over the entire length. Digital time switch to switch installations on and off or to control temperature reductions for the night or over the weekend. Electronic on/off temperature regulator for DIN rail installation. Specifications: –  djustment range from -10…+12°C. A –  Switch differential 1K. –  Protection class IP40. – Voltage free exchange contact. –  Switching power 24…230V~,...

Open the catalog to page 6
CONTROL EQUIPMENT - 7

OJ USER INTERFACE WITH TOUCH PANEL Order code: 0629165 (wall installation) User friendly control panel for commissioning and setting the daily operation of the Mark Airstream. The control panel is very easy to use, thanks to the logical menu’s, easy navigation and recognizable symbols. Sensor that detects CO2 content in the air. The detection range of this CO2 sensor is calibrated for standard applications such as monitoring of residential rooms or conference rooms. Regulator to regulate the speed of 1~230V voltage adjustable fan motors. Specifications: –  3.5” color Touchscreen. –  Easy...

Open the catalog to page 7
CONTROL EQUIPMENT - 8

Controllers / Switches Order code: Regulator to regulate the speed of 3~400V voltage adjustable fan motors. Regulator to manually switch 3~400V fan motors in Y/∆ to high/low. 5-position regulator to control the hot water air curtain fan on the EASYAIR P model with doorcontact control. Specifications: –  Option to connect several fans with themaximum connection current. –  Protection class IP54/IP21. –  Selector to switch the fan to 6 positions, including off. –  Green operating lamp. –  Option to connect a room and/or construction thermostat. –  Option to control an air valve for example...

Open the catalog to page 8
CONTROL EQUIPMENT - 9

Electronic regulator for control of the EASYAIR E electric air curtain. Selector to switch the fan on the MCB 230V to 3 positions. An Interface+ can be used in two ways. 1. Power control: An externally supplied 0-10VDC signal is converted into a power control of the burner. With an Interface+ module, one G(S)+ can be controlled. Potential free entry: Reset Potential free exits: Malfunction Operation 2. Connection BMS (building management system): Settings, actual temperatures and fault codes can be read using Modbus. Settings of the OptiTherm+ can be modified. Specifications: –  Dimensions...

Open the catalog to page 9
CONTROL EQUIPMENT - 10

Controllers / Switches PRESSURE SENSOR POTENTIOMETER WITH ON/OFF CONTACT MULTI-FUNCTIONAL CONTROLLER 230V WITH INTEGRATED DISPLAY To control an EC-fan based on pressure. To variable control the MDV Blue EC fan through a 0-10V signal. Controller to control MDV Blue fans on the basis of temperature and CO2, constant flow, constant pressure, constant humidity, constant CO2, CO2 and temperature. Specifications: –  Measuring range: 0-2500Pa –  Accuracy: 0,5% * measured value ±2,5Pa –  Maximum pressure: 20kPA –  Dimensions: 91x75x38mm (wxhxd) –  Ambient temperature: -20 / +40°C (operation) 0 /...

Open the catalog to page 10

All Mark Climate Technology catalogs and technical brochures

  1. MDV Blue

    14 Pages

  2. ERV

    3 Pages

  3. AHU

    8 Pages

  4. GC+

    6 Pages

  5. CALFLO

    4 Pages

  6. ColdStream

    5 Pages

  7. HEAT PUMPS

    4 Pages

  8. ECOFLEX

    3 Pages

  9. POWERFLEX

    3 Pages

  10. MEGAFLEX

    3 Pages

  11. MAXIFLEX

    1 Pages

  12. Bender

    2 Pages