Wire Terminal Pull Tester Model WT3-201
3Pages

Wire Terminal Pull Tester Model WT3-201 The WT3-201 is designed to measure the pull-off force of wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of force. Adjustable terminal fixture contains multiple slots for diameters up to AWG 3 (0.25 in [6.3 mm]). The tester accommodates most insulation types. Samples can be sent to Mark-10 for evaluation prior to purchase. A large, backlit graphic LCD displays easy-to-read values, including realtime force, peak force, programmable pass/fail limits, units of measurement, and more. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. An analog load bar is shown on the display for graphical representation of applied force. On-board data storage for up to 1,000 readings is included, as are statistical calculations and output to a PC. Unique automatic output / data storage / zeroing upon sample break helps automate testing processes. An optional ring terminal fixture may be used to secure ring terminations, and an optional carrying case makes transportation simple and safe. MESUR® Lite data acquisition software is included with the WT3-200 The WT3-201 includes MESUR® Lite data acquisition software. MESUR® Lite tabulates continuous or single point data. Data stored in the tester’s memory can also be downloaded in bulk. One-click export to Excel allows for further data manipulation. Features n Measures real-time and peak forces n Password protection prevents unauthorized changes n Ergonomic lever operation produces 200 lbF (1,000 N) n Programmable set point indicators and outputs for pass / fail determination n Terminal fixture suits wires up to Ø0.25 in [6.3 mm] n USB, RS-232, Mitutoyo (Digimatic), and analog outputs n Automatic output / data storage / zeroing upon sample break helps automate testing processes n 1,000-point data memory with statistics and outputs Adjustable wire terminal fixture accommodates wire diameter sizes up to 0.25 in (6.3 mm) n High-speed 7,000 Hz sampling rate accurately captures peak force values n Configurable audio alarms and key tones n Mounting holes for bench mounting Ergonomic lever easily applies force and releases the sample. Unique knurled cam design effectively secures and pulls the loose end of the sample. Specifications subject to change without prior not

Data Sheet Wire Terminal Pull Tester Model WT3-201 Page 2 of 3 Controls & Indicators Peak force Current / peak force Measurement mode Unit of measurement Analog load bar w/set point markers Set points (pass / fail limits) Pass / fail indicators Battery indicator Memory storage for 1,000 readings Access the tester’s settings menu via an easy-to-use interface Zero the reading to begin a new test (auto-zero also possible) One-push data output to a PC, printer, or other device (auto-output also possible) Toggle between real time and peak display modes Force Capacity: Wire diameter range:...

Wire Terminal Pull Tester Model WT3-201 Optional Items WT3002 Ring terminal fixture Secures ring terminations. Pin diameter sizes from 1/8 to 3/8 in [3.2 to 9.5 mm]. WT3003 Machinable blank terminal fixture For unique sample shapes and sizes. WT3004 Carrying case Provides storage space for the WT3-201 tester, optional ring terminal fixture, AC adapter, USB cable, and accessories. CERT Calibration certificate w/data Includes 10 data points (short form certificate without data is included). In The Box The WT3-201 Wire Crimp Pull Tester is shipped as shown at right and includes the following...