Torque Indicator Model 7i
5Pages

Data Sheet Professional Force / Torque Indicator Model 7i Page 1 of 4 The 7i professional digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see page 4). With exclusive Plug & TestTM technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators. The 7i features an industry-leading sampling rate of 14,000 Hz, producing reliable results for extremely quickaction tests. In addition to the 5i indicator’s functions, the 7i features high speed continuous data capture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The 7i also features programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Coefficient of friction unit of measurement and a user-defined unit of measurement add flexibility for specialized applications. For productivity enhancement, the indicator also features automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection. The 7i interfaces with Mark-10 test stands to permit functions such as break testing, dynamic load holding, PC control capability, and more. The included MESURTM Lite data acquisition software tabulates continuous or single point data. Data saved in the indicator’s memory can also be downloaded in bulk. One-click export to Excel easily 7i is shown mounted to an optional AC1008 tabletop stand with Series allows for further data manipulation. MESURTM Lite data acquisition software is included with the 7i Features n Interchangeable force and torque sensors through Plug & TestTM technology n Sensor password protection, for preventing use of an unauthorized sensor n 5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name n High-speed 14,000 Hz sampling rate n Programmable footswitch command string n Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC n Individual data point memory for up to 5,000 readings, downloadable to a PC n USB, RS-232, Mitutoyo, and analog outputs n Sample break detection with auto functions, including stopping movement of a Mark-10 test stand Display Indicators Pass/fail indicators Automatic output indicator Battery indicator Number of saved data points n Automatic output / data storage / zeroing upon various event completions n Programmable set points, with indicators and outputs n Averaging mode - calculates average readings over time n External trigger mode - for switch contact testing or remotely stopping display update n Password protection, configurable for individual keys and calibration Tension / compression indicator / Clockwise / counter-clockwise indicator Peak readings Current reading Measurement mode Units of measurement Analog load bar w/set point markers Mark-10 Corporation n www.mark-10.com n info@mark-10.com Toll-free: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201 Specifications subject to change without prior not

Data Sheet Professional Force / Torque Indicator Model 7i 32-1175 REV 0119 Page 2 of 4 Focus on Engineering: Specialized Functions The 7i indicator features several functions typically found in more complex instruments, such as materials testers, data acquisition systems, and PLCs. The following unique features are highlighted: High Speed Data Capture & Storage > 7i can capture and store up to 5,000 continuous data points at a rate of up to 14,000 readings per second. This unique function is ideal for capturing switch activation forces, sharp breaks, and other short-duration applications....

Data Sheet Professional Force / Torque Indicator Model 7i Page 3 of 4 Focus on Engineering: Reversible Housing Sensor connector oriented up Reversible housing allows the sensor connector to be oriented up or down. Display and keypad are upright Sensor connector oriented down Housing separates into reversible halves, electrically connected by gold-plated spring contacts. The display and keypad remain upright. Focus on Engineering: Plug & TestTM Technology ^Unique Plug & TestTM technology allows for interchangeable sensors to be used with a Mark-10 model 7i, 5i or 3i indicator. All...

Professional Force / Torque Indicator Page 3 of4 In The Box The 7i force / torque indicator is shipped as shown at left, and includes the following accessories: (1) Carrying case (1) USB cable (1) AC adapter (1) Resource CD Force and torque sensors are available separately. Ordering Information Model Specifications subject to change without prior notice

Data Sheet Professional Force / Torque Indicator Model 7i Page 4 of 4 Models 7i, 5i, and 3i force / torque indicators are designed for use with Mark-10’s Plug & TestTM remote force and torque sensors. All calibration and configuration data is saved within the sensors’ smart connectors - not the indicator - allowing for true interchangeability. Each sensor series is available in a range of capacities, from 0.25 to 10,000 lbF (1 N to 50 kN) full scale and from 10 ozFin to 5,000 lbFin (7 Ncm to 550 Nm) full scale. Refer to individual sensor data sheets for further details. Series R01 Tension /...