Series F Digital Force Testers Brochure
24Pages

Digital Force Testers Force and Torque Measurement Engineered Better

Force Measurement Re-imagined Series F Tension / Compression Test Frames are engineered for force testing applications up to 1,500 lbF (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures. Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device. Virtually limitless applications From food packaging to electronics, from...

Engineered For Performance There’s a Series F test frame for every need and budget. Select from a wide range of force capacities, heights, and form factors. Force Capacity: Travel Distance:

Rigid and precise mechanical design Seamless force sensor interface Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position. Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale. Stepper motors and controllers drive a ballscrew and linear guideway for smooth,...

An integrated motion control and data collection solution IntelliMESUR® software is an integrated solution running on Windows tablets and PCs. Select a pre-loaded 10.1” tablet with mounting bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-step tests, including: Limit testing to a load, break, or distance Height measurement Load holding Cycle testing Multi-step testing, utilizing any combination of motion control and data collection functions Perform individual runs or batches, and view data in graphical format or results...

INTELLIMESUR® Ready. Set. Go. From IntelliMESUR®’s home screen, quickly access up to 10 favorite tests. Associate an image with each favorite for easy identification. What’s your point of view? Run a test via the Graph or Results views, and switch views as needed. Pass / Fail indicator easily identifies problematic samples. Individual runs may be invalidated if, for example, the sample slips out of the grips, or the test was interrupted. Graph view The Graph view plots force vs. distance or force vs. time. Overlay up to 10 runs for visual comparisons. Results view The Results view displays...

Test setup is easy as 1-2-3 Basic tests Select a test type, and IntelliMESUR® will guide you through the setup. Load Limit Distance Limit Break Limit Units of measurement Batch size Display preferences Preload Test objective Speed Pass / fail limits Exception limits Operator prompts Pre-Test Settings Test Settings Results & Statistics Selection Load Hold Cycle 3. Results & Statistics Selection Final load Maximum load Minimum load Load at max. distance Load at min. distance Load at break Average load Delta load Maximum distance Final distance Minimum distance Height Distance at max. load...

INTELLIMESUR® Multi-step tests Building upon basic test wizards, easily incorporate any combination of steps, with the ability to loop a sequence of steps. Select from: Move to load Move to distance Move to break Hold a load or position Loop / cycle Datum Prompts Save current load or position Insert and re-order steps as necessary Zero load or position Return to Home position Operator prompting Prompts can appear at the beginning of each test, batch, or run. Ask prompts ask the operator for information which is saved in the results table - for example, a lot number. Type the response or use...

Robust data acquisition and management Blazingly fast Force sensor sampling rate of 20,000 Hz yields accurate peak measurements even in quick-duration events. IntelliMESUR® collects load and travel data at up to 1,000 Hz, and allows up to 4 million data points per run. Customizable reporting Print or create a PDF report, including results, statistics, graph, system and user information, and comments. Personalize the report with your company logo and an additional image. Create report templates to save with future reports. Save or export data Automatically or manually save individual runs...

Intelligent manual control Manually control the test frame to obtain quick force and distance results, or manually position the crosshead prior to a test. Select from several actuation methods, including momentary (button-hold), maintained (button release) motion, jog mode with three distance presets. With Mark-10’s innovative FollowMe® function, push and pull on the force sensor to move the crosshead. Apply greater force to achieve faster motion. FollowMe® is responsive enough for quick positioning as well as fine adjustments. The Height / Length Offset utility in Manual Control defines a...

Uniquely serviceable Calibrate force sensors on the test frame or off-site Calibrate Series FS05 and R07 force sensors in one of two ways: Test frame IntelliMESUR® provides an integrated utility, with an intuitive step-by-step wizard. Manual controls allow the technician to use the test frame to apply tension and compression forces. Off-site Conveniently remove the force sensors for off-site calibration with a Mark-10 Model M7I or M5I indicator. FS05 force sensor connected to an M5I indicator via AC1083 adapter for off-site calibration Field-upgradeable Test frame firmware and IntelliMESUR®...

■ Control panel, mounting bracket, and hardware ■ Control panel, mounting bracket, and hardware ■ Mounting bracket, column end (F505H only) ■ USB flash drive containing software installation files (-IM models only) USB dongle (-IM models only) USB cable #10-32M medium hook 5/16-18M large hook #10-32F 2” diameter compression plate #10-32 M/F 2” extension rod #10-32 F/F coupler ■ USB flash drive containing software installation files (-IM models only) USB dongle (-IM models only) USB cable Eye end kit for base Lock ring for eye end (2) Spanner wrench (2) Power cord Allen wrench set...