Manual Force Test Stands ES10 & ES20

Product catalog summary

Overview: The document provides specifications for the ES10 and ES20 manual force test stands, designed for low force applications with small sample sizes. These stands can apply both tensile and compressive forces up to 100 lbF (500 N).

Specifications:

Load Capacity: 100 lbF (500 N)
Maximum Travel: 9 inches (229 mm)
Loading Method: ES10 uses a lever, while ES20 uses a hand wheel
Travel Rate: ES10: 1.05 inches per lever revolution; ES20: 0.083 inches per hand wheel revolution
Weight: 10 lb (4.5 kg)
Warranty: 3 years

Optional Equipment:

Dial Travel Indicator (ES001): 1-inch displacement with 0.001-inch resolution
Digital Travel Indicator (ES002): 1-inch/25 mm displacement with 0.0005-inch/0.01 mm resolution
Base Plate (AC1060): Steel with threaded holes for fixture mounting

Applications: The ES20 is suitable for peel testing with digital force gauges and grips, while the ES10 is used for wire terminal pull-off tests.

Ordering Information: Includes model numbers and descriptions for test stands and accessories.

In The Box: Each test stand includes a lever or hand wheel, Allen wrench set, and thumb screws for force gauge attachment.

Catalog excerpts

Data Sheet Manual Force Test Stands ES10 & ES20 These compact and economical test stands are ideal for low force applications with relatively small sample sizes. The ES10 and ES20 produce both tensile and compressive force up to 100 lbF (500 N). Choose between lever operation for quick tests or hand wheel operation for better control of motion. Combine these test stands with Mark-10 digital force gauges and gripping fixtures to create complete testing solutions. Load capacity: Maximum travel: Hand wheel 3 years (see individual statement for details) Optional Equipment Dial travel indicator ES001 1” displacement, 0.001” resolution. Mounts onto the test stand and can be repositioned. Digital travel indicator ES002 1” / 25 mm displacement, 0.0005” / 0.01 mm resolution. Includes zero and in/mm selector buttons. Mounts onto the test stand and can be repositioned. Indicator mounting kits ES001NI (-8MM) For customer-supplied indicators with 8 mm or 9.5 mm dia. stem sizes. Steel base plate has matrix of #10-32 threaded holes for fixture mounting The ES20 is shown in a peel testing application with Series 5 digital force gauge, and film & paper grips. The ES10 is shown in a wire terminal pull-off test, with Series 5 digital force gauge, wire terminal grip, and dual roller grip. Dial travel indicator Digital travel indicator Base plate Ordering Information Model No. Test stand, lever-operated, 100 lbF Test stand, hand wheel-operated, 100 lbF Dial indicator kit for ES10 / ES20, 1” travel Digital indicator kit for ES10 / ES20, 1” / 25 mm travel Mounting kit for 9.5 mm dia. indicator stem (indicator not included) Mounting kit for 8 mm dia. indicator stem (indicator not included) Base plate, threaded holes The ES10 and ES20 test stands are shipped as shown above, and include the following accessories: (1) Lever (ES10) or hand wheel (ES20) (1) Allen wrench set (4) Thumb screw for force gauge Mark-10 Corporation n www.mark-10.com n [email protected] Toll-free: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201 Specifications subject to change without p

Open the catalog to page 1

Data Sheet Manual Force Test Stands ES10 & ES20 Specifications subject to change without prior notice

Open the catalog to page 2

All Mark-10 catalogs and technical brochures

Archived catalogs

Force & Torque Measurement Products
48 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list