Grips & Attachments 90°peel fixture
20Pages

{{requestButtons}}

Catalog excerpts

Grips & Attachments 90°peel fixture - 1

Grips & Attachments Page 1 of 20 Tensile / Pull Wedge grips Heavy-duty grips designed for a range of tensile testing requirements up to 2,000 lbF [10 kN]. Self-tightening stainless steel serrated or rubber jaw faces engage the sample through a spring loaded knob and rack and pinion type mechanism. The jaws ride on rollers, eliminating jamming common in conventional wedge grips. Includes a #10-32 M/M stud with jam nuts Specifications subject to change without prior notice

Open the catalog to page 1
Grips & Attachments 90°peel fixture - 2

Grips & AttachmentsPage 2 of 20 Miniature component gripFor testing small and hard-to-reach electronic and mechanical components. Slender profile allows this grip to be used in a wide range of applications. Model No. Includes a #10-32 M/M stud with jam nuts Multi-jaw grip For gripping round or odd shaped items. Jaws expand and retract by rotating the housing. Model No. Includes a #10-32 M/M stud with jam nuts Clevis gripThis grip is designed for ergonomic assessment, spring testing, and other pull testing applications. Model No. Includes a 5/16-18M to #10-32F thread adapter, 5/16-18 M/M...

Open the catalog to page 2
Grips & Attachments 90°peel fixture - 3

Grips & Attachments Page 3 of 20 High capacity clevis grip This high capacity grip is designed for spring testing and pulling testing applications. Integrated eye end. Ribbon wrap grip Secures textile webbing, tape, and braided materials typically used in construction, shipping, and other industrial uses. Integrated eye end. Specifications subject to change without prior notice

Open the catalog to page 3
Grips & Attachments 90°peel fixture - 4

Grips & Attachments Page 4 of 20 Packaging / Peel / Friction Film and paper grips For gripping film, paper, and other thin materials for tensile and peel testing. Adjustable serrated interlocking jaws grip the sample securely. Includes a #10-32 M/M stud with jam nuts Pneumatic film and paper grip Fully enclosed, air-powered grip for seal strength testing of packaging, elongation testing of various materials, and other tensile testing requirements. Serrated interlocking jaws effectively grip samples for up to 100 lbF of force. The grip features a unique integrated open/close valve for quick...

Open the catalog to page 4
Grips & Attachments 90°peel fixture - 5

Grips & Attachments Page 5 of 20 90° peel fixture For testing adhesive strength of tapes, films, and packaging. Maintains a 90° angle between the table and direction of pull. An integrated limit switch automatically stops the motion of an ESM303 motorized test stand when the work table has reached its end of travel. Optional adjustable angle accessories are available. G1109 is compatible with the ESM303 motorized test stand only. Mounting hardware is included. Coefficient of friction fixture For determining friction properties of paper, film, and other thin flexible materials. Conforms to...

Open the catalog to page 5
Grips & Attachments 90°peel fixture - 6

Grips & Attachments Page 6 of 20 Score bending fixture Used to produce a 90° bend in fiber board materials and plastics to conform to TAPPI standard T829. Set of upper and lower dies. * Including one test strip Includes a 5/16-18 M/M stud with jam nuts. EIESE] Mark-10 Corporation ■ www.mark-10.com ■ info@mark-10.com Toll-free: 888-MARK-TEN ■ Tel: 631-842-9200 ■ Fax: 631-842-9201 Specifications subject to change without prior notice

Open the catalog to page 6
Grips & Attachments 90°peel fixture - 7

Data Sheet Grips & AttachmentsPage 7 of 20 Flip Cap Pull GripDesigned to engage the tab on a flip cap for pull-off force measurements. A spring-loaded hook retracts as it is lowered into the starting position, then snaps into place below the tab. Model No. Includes a #10-32 M/M stud with jam nuts Cork Pull FixtureDesigned to extract a cork stopper out of a bottle for pull force measurements, in conformance with ISO 9727. Mark-10 Corporation ■ www.mark-10.com ■ info@mark-10.com Toll-free: 888-MARK-TEN ■ Tel: 631-842-9200 ■ Fax: 631-842-9201 Includes a G1035 large hook, G1018-2 swivel...

Open the catalog to page 7
Grips & Attachments 90°peel fixture - 8

Grips & Attachments Page 8 of 20 Vise / Parallel Jaw Parallel jaw / vise-action grip, large For general tensile and pull testing applications. Includes an adjustable stop to ensure consistent sample placement. Integrated eye end. 3.94 in [100.0 mm] extended length jaws are available. See website for details. Parallel jaw / vise-action grip, medium For general tensile and pull testing applications. Integrated eye end. Extended length jaws are available: 1.97 in [50.0 mm], 3.15 in [80.0 mm], 3.94 in [100.0 mm]. See website for details. Parallel jaw / vise-action grip For general tensile and...

Open the catalog to page 8
Grips & Attachments 90°peel fixture - 9

Data Sheet Grips & AttachmentsPage 9 of 20 Vise grip, self-centeringGeneral purpose vise, for a wide range of tension and compression testing applications. Self-centering, replaceable jaws can be field-modified to improve sample gripping characteristics. Model No. Includes mounting hardware and adapters to mount to the following test stands: ESM303, ESM1500/750 (w/AC1055 plate), ES30, TSC1000, TSF, ES10/ES20 (w/AC1060 plate). Includes a 5/16-18M to #10-32F adapter and #10-32 M/M stud with jam nuts Wire terminal grip, turret styleFor securing wire terminals, cables, connectors, and other...

Open the catalog to page 9
Grips & Attachments 90°peel fixture - 10

Data Sheet Grips & Attachments Page 10 of 20 High capacity wire terminal grip For securing wire terminals, cables, connectors, and other samples for pull testing. Indexing wheel contains grooves of varying widths to accommodate a wide range of sample shapes and sizes. Integrated eye end. Includes a 5/16-18 M/M stud with jam nuts Specifications subject to change without prior notice

Open the catalog to page 10
Grips & Attachments 90°peel fixture - 11

Grips & Attachments Page 11 of 20 Miniature filament grip For securing small diameter wires and filaments. The sample wraps around the bollard and the loose end is secured by the adjustable jaw. Integrated swivel ensures sample alignment under load. Includes #10-32 M/M stud with jam nuts Wire / rope grip, medium For securing wire and rope. The sample wraps around the bollard and the loose end is secured by the adjustable rubber-faced jaw. Integrated eye end. Wire / rope grip, large For securing wire and rope. The sample wraps around the bollard and the loose end is secured by an adjustable...

Open the catalog to page 11
Grips & Attachments 90°peel fixture - 12

Data Sheet Grips & Attachments Page 12 of 20 High capacity eccentric roller grip Features a serrated cam for effectively securing wires, plastics, textiles, and other materials in pull testing applications. Integrated eye end. Specifications subject to change without prior notice

Open the catalog to page 12

All Mark-10 catalogs and technical brochures

  1. Catalog

    84 Pages

  2. Catalog

    76 Pages

Archived catalogs