Catalog
84Pages

{{requestButtons}}

Catalog excerpts

Catalog - 1

Force and Torque Measurement Products Force and Torque Measurement Engineered Better

Open the catalog to page 1
Catalog - 2

About Mark-10 Mark-10 Corporation is a designer and manufacturer of force and torque measurement products. Since our founding in 1979, our products have proven themselves in numerous applications at companies in the automotive, medical device, plastics, textile, pharmaceutical, packaging, food, and virtually every other industry, worldwide. Focus On Engineering Founded in 1979 as an engineering consultancy, and branching out into contract manufacturing in the 1980s, Mark-10 has focused on better engineering and technical expertise from our very beginning. Having acquired years of expertise...

Open the catalog to page 2
Catalog - 4

Medical Device & Pharmaceutical ■ Needle penetration force ■ Tablet crush force ■ Suture strength ■ Packaging peel force ■ Syringe plunger force Industries & Applications ■ Tubing connector pull-off force ■ Luer lock torque ■ Dental and bone screw torque ■ Adhesive strength ■ Tensile strength of orthodontic wire of bandages ■ Stopcock torque ■ Catheter torque Automotive ■ Switch activation force ■ Ergonomics / job task analysis ■ Rotary dial torque ■ Torque tool calibration ■ Seat belt retraction force ■ Job task analysis ■ Fastener torque testing ■ I gnition switch torque measurement ■...

Open the catalog to page 4
Catalog - 5

Packaging ■ 90° peel testing of adhesive tapes ■ T-peel tests of flexible packaging materials ■ 180° peel testing ■ Opening force testing ■ Score bend testing ■ Bottle cap torque testing ■ Coefficient of friction testing ■ Top-load testing of bottles and cartons ■ Foil seal pull-off testing Consumer Products & Sports Equipment ■ Peel testing of packaging materials ■ Wire crimp pull testing ■ Spring testing ■ Dial torque testing ■ Ski flex testing ■ Goggle strap pull testing ■ Tennis ball compression testing ■ Lace break strength ■ Elongation testing of elastomers, plastics, and other...

Open the catalog to page 5
Catalog - 6

Welcome to Mark-10 Table of Contents Digital Force & Torque Gauges Plug & TestTM Indicators & Remote Sensors Wire Crimp Pull Testers Ergonomics Gauges & Kits Grips & Attachments Dimensional Drawings ZERO TRAVEL Configuring a Typical Mark-10 System Force Testing Systems Torque Testing Systems Produces the force needed for the test. A test stand eliminates much of the variability inherent in hand-held testing with a force gauge. Motorized and manual models are available. 3 2 Digital force gauge Measures the force being produced on the test sample. Choose from several gauge series. All Mark-10...

Open the catalog to page 6
Catalog - 7

Series 7 7 Series 7 professional digital force gauges are designed with a number of sophisticated features for the most demanding tension and compression measurement applications, up to 500 lbF (2,500 N). The gauges feature ±0.1% accuracy and a blazingly fast, industryleading sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests. Features: ■ High speed data capture and storage Capture and store up to 5,000 continuous data points at a rate of up to 14,000 readings per second. This unique function is ideal for capturing switch activation forces, sharp breaks,...

Open the catalog to page 7
Catalog - 8

Digital Force & Torque Gauges Series 4 The M5-2-COF coefficient of friction (COF) gauge is an integral part of a COF testing system, typically including a motorized test stand and COF fixture. With a capacity of 2 lbF [10 N], the gauge can be used to measure friction for a wide range of materials, ideal for conformance to ASTM D1894 and other relevant standards. Static and kinetic coefficients are displayed on the backlit LCD, and are calculated from a user-programmable sled weight. Series 4 advanced digital force gauges feature a sampling rate of 3,000 Hz and ±0.2% accuracy, producing...

Open the catalog to page 8
Catalog - 9

Series 3 Series 3 basic digital force gauges feature a sampling rate of 2,000 Hz and ±0.3% accuracy, ideal for numerous applications in virtually every industry. Set point indicators are useful for visual pass/fail testing, while an analog load bar provides graphical representation of applied load. Ultra-compact, reversible housing allows for flexibility in many mounting configurations with space constraints. Series 2 digital force gauges are designed for basic tension and compression force testing applications up to 500 lbF (2,500 N). Peak tension and compression readings are reliably...

Open the catalog to page 9
Catalog - 10

Digital Force & Torque Gauges Series TT01 Series TT01 cap torque testers provide closure manufacturers, bottlers, and food and beverage companies an accurate and simple way to measure application and removal torques. Adjustable posts grip a broad range of container shapes and sizes, while sets of optional jaws are available as an alternative gripping methods. Peak torque readings are always shown on the large, backlit graphic display. Features: ■ USB, RS-232, Mitutoyo, and analog outputs ■ Data memory 1,000-point data memory with statistics (min, max, mean, standard deviation), and outputs....

Open the catalog to page 10
Catalog - 11

Series TT05 Series TT03 digital torque gauges are designed for clockwise and counter-clockwise torque testing applications in virtually every industry, with capacities from 10 ozFin to 100 lbFin (7 to 1,150 Ncm). A dedicated remote torque sensor with Jacobs chuck can be used to grip a sample, bit, or fixture. The gauges’ rugged aluminum housing allows for hand-held use or test stand mounting for more sophisticated testing requirements. Features: ■ Rugged, compact design Indicator and remote sensor with Jacobs chuck. Can be hand-held or mounted to a test stand. ■ USB data output Continuous...

Open the catalog to page 11
Catalog - 12

Digital Force & Torque Gauges Specifications - Force Gauges Accuracy (% of full scale) Sampling rate Serial BCD suitable for all Mitutoyo SPC-compatible devices Mitutoyo (Digimatic) ±1 VDC, ±0.25% FS at capacity. Positive for compression, negative for tension Three open drain outputs, one input Three open drain lines Lite software included Data output functionality By pressing DATA button, or requesting from a PC or other device (currently displayed reading only). Automatic output or by pressing DATA button, or requesting from a PC or other device. Full command set “?” only (request current...

Open the catalog to page 12

All Mark-10 catalogs and technical brochures

  1. Catalog

    76 Pages

Archived catalogs