video corpo

Advanced Digital Force Gauges Series 5


Catalog excerpts

Advanced Digital Force Gauges Series 5 - 1

Data Sheet Advanced Digital Force Gauges Series 5 Page 1 of 3 Series 5 advanced digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N). The gauges feature an industry-leading sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges’ many features and configurable parameters. Data can be transferred to a PC or data collectors via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. On-board data memory for up to 1,000 readings is included, as are statistical calculations with output to a PC. Integrated set points with indicators and outputs are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The Series 5’s averaging mode addresses the need to record the Shown with an ESM303 test stand average force over time, useful in applications such as peel testing, and G1008 film & paper grips while external trigger mode makes switch activation testing simple and accurate. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 5 force gauges are directly compatible with Mark-10 test stands, grips, and software. Series 5 gauges include MESUR® Lite data acquisition software. MESUR® Lite tabulates continuous or single point data from Series 5 gauges. Data saved in the gauge’s memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation. MESUR® Lite data acquisition software is included with Series 5 gauges Features n High-speed 7,000 Hz sampling rate n Averaging mode - calculates average readings over time n USB, RS-232, Mitutoyo, and analog outputs n External trigger mode - for switch contact testing or remotely stopping display update n Large backlit graphic display n 1,000-point data memory with statistics and outputs n Live load bar graph with set point markers n Programmable set points, with indicators and outputs n Peak readings and set points always displayed Display Indicators Set points Pass/fail indicators Automatic output indicator Battery indicator Number of saved data points n Automatic data output via USB/RS-232 n 5 selectable units of measurement n Configurable audio alarms and key tones n Password protection, configurable for individual keys and calibration Tension / compression indicator Peak readings Current reading Measurement mode Units of measurement Analog load bar w/set point markers Mark-10 Corporation n n Toll-free: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201 Specifications subject to change without prior

Open the catalog to page 1
Advanced Digital Force Gauges Series 5 - 2

Data Sheet Advanced Digital Force Gauges Series 5 Page 2 of 3 Focus on Engineering: Reversible Housing Shaft up Reversible housing allows the gauge to be handheld or mounted to a test stand. Display and keypad are upright The display and keypad remain upright. Shaft down Housing separates into reversible halves, electrically connected by gold-plated spring contacts. Specifications Accuracy: Sampling Rate: AC adapter: 100-240VAC, 50-60 Hz, 0.3 A Battery: Rechargeable 8.4V NiMH Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches...

Open the catalog to page 2
Advanced Digital Force Gauges Series 5 - 3

Advanced Digital Force Gauges Series 5 Data Sheet Series 5 force gauges are shipped as shown at left, and include the following accessories: (1) Extension rod * (1) Hook * (1) Cone * (1) Chisel * (1) V-Groove * (1) Flat * (1) Coupling * (1) Thread adapter * (1) Carrying case (1) USB cable (1) AC adapter (1) Battery (1) Certificate of calibration with data * he specific accessory depends on the force gauge model. Refer T to the website for details. For Models M5-1000 and M5-2000, refer to their respective data sheet All models include 110V AC adapters. Add suffix ‘E’ for euro plug (220V),‘U’...

Open the catalog to page 3

All Mark-10 catalogs and technical brochures

  1. Catalog

    84 Pages

  2. Catalog

    76 Pages

Archived catalogs