SINGLE JOINTS

Product catalog summary

Single Joints Series 'S' (DIN 808)

This document provides technical specifications for the Single Joints Series 'S', following the DIN 808 standard. The series includes various models identified by codes such as SSOS 0600, SSOS 0800, up to SSOS 3000. Each model is characterized by specific dimensions and weights.

Specifications:

Dimensions: The document lists dimensions such as diameter (d), outer diameter (D), and lengths (L1, L2) for each model.
Material: The joints are made from a single piece of Nickel Chrome steel, which is cemented and hardened to achieve a hardness of HRC >= 60 and a tensile strength of R >= 200 Kgf/sq.mm.
Performance: The joints offer high wear resistance and long life. They are pre-lubricated with a built-in greaser.
Operational Limits: The maximum operational angle is 45 degrees, and the maximum speed is 1000 revolutions per minute (R.P.M).

Additional Information:

Special executions are available upon request.
Selection criteria can be found on page 27 of the document.

Catalog excerpts

GIUNTI SINGOLI SINGLE JOINTS Nucleo e forcelle integrali in acc. Cr. Ni. Cementato e temperato 2 HRC >= 60, R >= 200 Kgf/mm. Central block and forks from one piece of Nickel Chrome steel cemented and hardened HRC >= 60, R >= 200 Kgf/sq.mm. Elevata resistenza usura, lunga durata. High wear resistance, long life. Prelubrificati. Ingrassatore incorporato. Pre-lubricated. Graser built-in. Angolo max: 45°. Giri max. 1000/min. Max angle: 45°. Max speed 1000 R.P.M. Esecuzioni speciali a richiesta. Special executions on request. Codice / Code Codice / Code Codice / Code Peso Weight Criteri di scelta pag. - Selection criteria page 27

Open the catalog to page 1

SINGLE JOINTS

SINGLE JOINTS

Catalog excerpts

All MARIO FERRI catalogs and technical brochures