1. Catalogs
  2. Marelli Motori S.p.A.
  3. Hydropower Selection guide

Hydropower Selection guide

Hydropower Selection guide
1 / 22 PagesView full catalog

Hydropower Selection guide

Product catalog summary
Generator Range Overview
This document serves as a comprehensive guide for selecting hydropower generators, focusing on ODP synchronous and asynchronous generators in low and medium voltage configurations. It covers technical specifications, dimensions, and selection criteria for models such as MXT, MJT, MJHT, and C3G - C4G series.

Technical Information
Generators are categorized by power capacity, from up to 3,000 kW for low voltage asynchronous generators to up to 11,000 kVA for medium voltage synchronous generators. The nominal power factor is 0.8 lagging, with derating factors for different power factor values. Special configurations like air to water heat exchangers require a power derating of 0.9.

Environmental Conditions
Rated outputs are specified for installations up to 1,000 meters above sea level and ambient temperatures up to 40°C. Adjustments with specific derating factors are necessary for higher altitudes and temperatures.

Generator Specifications
Specifications for synchronous (MXT, MJT) and asynchronous (C3G, C4G) generators include poles, voltage, frequency, RPM, continuous duty ratings, moment of inertia, weight, and maximum overspeed, with mounting options specified.

Selection and Configuration
A selection table for Automatic Voltage Regulators (AVRs) is included, with guidance on choosing the appropriate generator configuration based on operational requirements. For unlisted configurations, Marelli Motori should be contacted.

Conclusion
This guide is a technical reference for selecting hydropower generators, considering power capacity, environmental conditions, and application needs. It emphasizes adhering to derating factors and consulting Marelli Motori for custom configurations.

Overview
The document provides detailed specifications and dimensions for Marelli Motori's C3G and C4G series asynchronous generators, including technical data on power output, efficiency, power factor, inertia, weight, and dimensions.

Specifications
Multiple generator models are listed by type (C3G, C4G), poles, and voltage. Each model's output power, speed, current, efficiency, power factor, inertia, weight, and maximum overspeed are specified. Efficiency and power factor are provided for full, three-quarter, and half loads.

Dimensions
Detailed dimensions for air-cooled (IC01) and air-to-water heat exchanger (IC81W) configurations are included, with measurements for horizontal and vertical mounting.

AVR Selection
An AVR selection table details available analogue and digital AVR types, their compatibility with generator frame sizes, and features like voltage sensing, remote control, and standard protections.

Contact Information
The document concludes with contact details for Marelli Motori's headquarters and regional offices worldwide, including Europe, Asia, Africa, the Middle East, and the Americas.
See more

Catalog excerpts

Hydropower Selection guide-1

MarelliMotori Inspired solutions HYDROPOWERSelection guide

 Open the catalog to page 1
Hydropower Selection guide-2

@MarelliMotori Hydropower 02 Generator range 02 Technical information 03 ODP synchronous generators low voltage: MXT - MJT 08 ODP synchronous generators medium voltage: MJHT 12 ODP synchronous generators: overall dimensions 14 ODP asynchronous generators low voltage: C3G - C4G 18 ODP asynchronous generators: overall dimensions 20 AVRs - Selection table

 Open the catalog to page 2
Hydropower Selection guide-3

Synchronous generators Asynchronous generators Counter pressure value will be communicated during generator design.

 Open the catalog to page 3
Hydropower Selection guide-4

ODP Synchronous generator Low voltage

 Open the catalog to page 4
Hydropower Selection guide-5

Continuous duty rating kVA @ Temp. rise over 40 °C ambient temp. * Only Flexible Coupling

 Open the catalog to page 5
Hydropower Selection guide-6

For different configurations / speed not included above, please contact Marelli Motori. *: 690V recommended ** Only 690 V The rated outputs refer to the following conditions: balanced and non deforming load, altitude below 1.000 m asl, power factor from 0,8 to 1. For values of overspeed greater than as listed, please contact Marelli Motori.

 Open the catalog to page 6
Hydropower Selection guide-7

For other power/sizes not included above, please contact Marelli Motori *: 690V recommended ** Only 690 V

 Open the catalog to page 7
Hydropower Selection guide-10

ODP Synchronous generators - MJHT For different configurations / speed not included above, please contact Marelli Motori. The rated outputs refer to the following conditions: balanced and non deforming load, altitude below 1.000 m a.s.l., power factor from 0,8 to 1. For values of overspeed greater than as listed, please contact Marelli Motori

 Open the catalog to page 10
Hydropower Selection guide-11

For different configurations / speed not included above, please contact Marelli Motori. The rated outputs refer to the following conditions: balanced and non deforming load, altitude below 1.000 m a.s.l., power factor from 0,8 to 1. For values of overspeed greater than as listed, please contact Marelli Motori

 Open the catalog to page 11
Hydropower Selection guide-12

MJHT Max overspeed M°unting Continuous duty rating kVA @ Temp. rise over 40 °C ambient temp. Type 12 POLES MJHT 630 SA12 Continuous duty rating kVA @ Temp. rise over 40 °C ambient temp. 105 AT 80 AT 105 AT 80 AT

 Open the catalog to page 12
Hydropower Selection guide-14

ODP Synchronous generators - Overall dimensions Dimensions for 450 frame size on demand

 Open the catalog to page 14
Hydropower Selection guide-19

ODP Asynchronous generators - Overall dimensions Air cooled (IC01) - Horizontal mounting Air cooled (IC01) - Veritical mounting

 Open the catalog to page 19
Hydropower Selection guide-20

ODP Asynchronous generators - Overall dimensions Air-to-water heat exchanger (IC81W) - Horizontalal mounting Dimension mm H HD AB L AO AD D E Air-to-water heat exchanger (IC81W) - Vertical mounting Dimension mm P L AO AD D E Dimensions for 450 frame size on demand

 Open the catalog to page 20
Hydropower Selection guide-21

AVR - SELECTION TABLEAVR type Generator frame size AVR supply Auxiliary winding1, mains Voltage sensing Single phase Three phase Voltage remote control Over-excitation device Arrangement for VARICOMP Parallel operation with the mains Standard protections Field over-current, field over-voltage, Over-excitation generator over/under voltage, generator over-current, loss of sensing. Under-frequency, over/under-excitation Auxiliary inputs PC interface, soft start, auxiliary inputs, contact inputs. PC interface, soft start, auxiliary inputs, contact inputs, DMS Auxiliary winding on the 160 available...

 Open the catalog to page 21
Hydropower Selection guide-22

Italy HQ Marelli Motori S.p.A. Via Sabbionara 1 36071 Arzignano (VI) - Italy (T) +39 0444 479 711 (F) +39 0444 479 888 [email protected] Asia Pacific Marelli Motori Asia Sdn Bhd Lot 1-8, Persiaran Jubli Perak, Seksyen 22, 40300 Shah Alam, Selangor D.E. - Malaysia (T) +60 355 171 999 (F) +60 355 171 883 [email protected] United Kingdom Marelli UK Main Street - The Old Rectory Glenfield Leicester, LE3 8DG - UK (T) +44 116 232 5167 (F) +44 116 232 5193 [email protected] USA Marelli USA, Inc. 2200 Norcross Parkway, Suite 290 Norcross, GA 30071 United States (T) +1 859 734 2588 (F)...

 Open the catalog to page 22
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.