0 HEAVY-DUTY PLUGS & SOCKETS ► Up to 600 A/1 000 V ► Automatic IP66/IP67 water-and dust-tight ► Mechanical and electrical interlocking ► Up to 6 auxiliary and 2 pilot contacts ► Marine aluminum casing and stainless steel AISI 316 L box

TECHNICAL FEATURES Socket-outlets that must be linked to switch/contactor via the pilot contacts. PFQ3 Auxiliary contacts available Pilot contacts Keying positions Ambient temperature MECHANICAL FEATURES Pilot contacts: designed to connect after and disconnect before the phase contacts IK10 metal casing High resistance to shocks Lateral spring-loaded silver butt-contacts. Silver is an excellent conductor and the plug engagement cleans contacts automatically. Electromechanical interlocking mechanism The locking mechanism guarantees safe and watertight connection and engages the pilot contacts...

HEAVY-DUTY PLUGS & SOCKETS MECHANICAL AND ELECTRICAL LOCKING OPERATING INSTRUCTIONS The male-female couple is automatically watertight. FIND PF OPERATION IN VIDEO PF operation Locking the plug in the socket closes the pilots and connects the main circuit.

ELECTRICAL INTERLOCKING At this level of power, it is not possible to cut directly under load. Electrical interlocking with a switch or a pilot controlled contactor is required. Boxes with the following equipment are available upon request: • circuit breaker or differential switch, • contactor, • fuses, • loop-out enclosures, • terminals for single pole cables... LINE DIAGRAM OF TYPICAL PF PILOT CONTROL CIRCUIT LOAD SIDE COIL SUPPLY PILOT CONTACTS PILOT CONTACTS Pilot contacts Pilot Amperage Interlocking Type Terminal Type Notes : The mechanical locking of the plug to the socket-outlet, via the...

HEAVY-DUTY PLUGS & SOCKETS Rated current Maximum voltage 315 A (PFQ3I/400 A (PFQ4) Flexible wiring (min-max) 690 V Stranded wiring (min-max) IP66/IP67 Wiring for single or multi entry IP protection plug connected Shock resistance Ambient temperature

BOXES STAINLESS STEEL 316 L CABLE GLAND INCLUDED On request: boxes for installation in ducts, boxes equipped with circuit breaker, earth-leakage switch, contactor,... Straight* 474A013-50 474A013-55 474A013-60 474A013-65 474A013-70 474A013-75 474A013-80 474A013-85 474A013-90 A right angled cable lug M14 with insulated sleeve Angled 90° 474A913-50 474A913-55 474A913-60 474A913-65 474A913-70 474A913-75 474A913-80 474A913-85 474A913-90 Straight cable lug M14 with insulated sleeve It is recommended to put an insulating sleeve once the lugs are crimped. Inlet lid * Trumpet gland available on request...

HEAVY-DUTY PLUGS & SOCKETS MAIN FEATURES Rated current Maximum voltage Flexible wiring (min-max) Stranded wiring (min-max) Wiring for single or multi entry IP protection plug connected Keying positions Shock resistance Ambient temperature

BOXES STAINLESS STEEL 316 L CABLE GLAND INCLUDED On request: boxes for installation in ducts, boxes equipped with circuit breaker, earth-leakage switch, contactor,... Straight * 496A013-50 496A013-55 496A013-60 496A013-65 496A013-70 496A013-75 496A013-80 496A013-85 496A013-90 A right angled cable lug M14 with insulated sleeve Angled 90° 496A913-50 496A913-55 496A913-60 496A913-65 496A913-70 496A913-75 496A913-80 496A913-85 496A913-90 Straight cable lug M14 with insulated sleeve It is recommended to put an insulating sleeve once the lugs are crimped. Inlet cap * Trumpet gland available on request...

0d : maximum drilling diameter.

0d : maximum drilling diameter.