*mydirectindustry

MTK 180L

Product catalog summary

Technical Specifications:
The MTK180L is a truck-mounted telescopic crane with a maximum capacity of 180 tons at 2 meters, designed for a 4-axle 8x4 truck chassis. It features a high-strength steel radial chassis with four telescopic beam outriggers and vertical jacks for independent movements and partial stabilization. The hydraulic system is powered by a PTO-driven load-sensing system with a variable displacement piston pump and two gear pumps, allowing up to four simultaneous maneuvers. The crane's boom is a 6-section telescopic design, extending from 7.9m to 36.3m, with a tiltable head for indoor work.

Safety and Control Systems:
The crane includes safety devices such as pressure valves, an emergency stop device, and an electronic moment limiter. It has a 3-color warning signal light, a buzzer, a rotating light, and a fire extinguisher. The electric system operates on a 24 Vdc Canbus data system, with three working lights for enhanced visibility.

Performance and Accessories:
The MTK180L offers a maximum tip height of 36.3 meters and a lifting capacity on the main boom of up to 15.9 tons. It includes a lattice boom extension, auxiliary and towing winches, a fixed hook, a working area limiter, and remote control options. The crane complies with the 2006/42/EC directive and features CE marking.

Additional Features:
The crane's cab is designed for high visibility and ergonomic comfort, featuring a safety roof glass, gasoil heating, air conditioning, and a 7-inch color display for monitoring work, engine settings, and diagnostics. It is painted with a polyurethane bi-component paint in grey RAL 7016 and yellow RAL 1007, with other colors available upon request.

Specifications:
Lifting capacities for the MTK180L crane model are specified in metric tons and are applicable only when the telescopic boom is used without the folding jib and jib. Capacities are valid with fully extended outriggers, and special equipment is required for lifting capacities above 86 tons.

Procedures:
Crane operation must adhere to the Use & Maintenance manual and the Lifting Charts provided with the machine. Following these guidelines is emphasized for safe operation.

Norms and Recommendations:
Specifications are subject to change without notice as part of a policy of constant improvement. Users are advised that the data provided is indicative and should be used as a guide.

Key Data from Tables:
Lifting capacities on the folding jib are detailed for various angles and extensions. For example, at a 36.3 m extension with a 7.1 m jib, capacities range from 8.0 tons at 0° to 6.0 tons at 40°. At a 36.3 m extension with a 13 m jib, capacities range from 10.0 tons at 0° to 3.1 tons at 40°.

Contact Information:
Marchetti S.p.A., Via Caorsana 49, 29122 Piacenza, Italy. Tel: ++39.0523.573711, Fax: ++39.0523.593253, Web: www.marchetti.it, Email: [email protected].

Catalog excerpts

AUTOGRU SU CAMION TRUCK MOUNTED TELESCOPIC CRANE

Open the catalog to page 1

Dimensioni (mm) Dimensions (mm) Dimensioni (mm) Dimensions (mm) Dimensioni indicative, variabili in funzione dell’autotelaio. Il disegno mostra applicazione su autotelaio VOLVO FMX13 8x4 Dimensioni indicative, variabili in funzione dell’autotelaio. Dimensions may change depending on the truck. Il disegno mostra applicazione su autotelaio VOLVO FMX13 8x4 This drawing shows the crane installed on the truck VOLVO FMX13 8x4 Dimensions may change depending on the truck. This drawing shows the crane installed on the truck VOLVO FMX13 8x4

Open the catalog to page 3

Le masse possono variare in funzione dell'autotelaio. (*) macchina base, allest. speciale; (**) solo in cantiere. Weights may change depending on the truck. (*) basic machine, special configuration; (**) in job site. Prestazioni della gru Performances Meccanismo - Drive Bozzelli Hook blocks Tipo - Type

Open the catalog to page 4

Descrizione Technical description SOVRASTRUTTURA massima180 180 @ installabile 2 m , installabile autotelaio Portata massima ton ton a 2 m, su autotelaiosucommerciale commerciale 4 assi 8x4 4 assi 8x4 SUPERSTRUCTURE Maximum capacity 180 2m, to to be be installed on commercial truck 180 ton ton @ a 2m, chassis, 4 axles 8x4 TELAIO E STABILIZZATORI Telaio in acciaio ad alta resistenza di tipo radiale. N.4 travi con sfilo telescopico e con apertura a bandiera. Movimenti indipendenti per ogni azionamento. Comandi dalla cabina gru e da entrambi i lati del carro. Sistema anticollisione con il camion....

Open the catalog to page 5

Altezze di sollevamento Maximum tip height 7,9 – 36,3m

Open the catalog to page 6

Tabella di portata del braccio Lifting capacities on main boom 7,9-36,3m

Open the catalog to page 7

Tabella di portata del braccio Lifting capacities on main boom 7,9-36,3m

Open the catalog to page 8

Tabella di portata della prolunga tralicciata Lifting capacities on the folding jib

Open the catalog to page 9

Tabella di portata del braccio Lifting capacities on main boom G 270°

Open the catalog to page 10

Tabella di portata della prolunga tralicciata Lifting capacities on the folding jib

Open the catalog to page 12

Sfilo sotto carico Sfilo sotto carico Telescopic extens. capacities Telescopic extens. capacities Diagramma a scopo illustrativo: capacità di spinta massima dello sfilo idraulico, valori teorici. Diagramma a scopo illustrativo: capacità di spinta massima dello sfilo idraulico, valori teorici. Hydraulic extension max theor. capacities. Hydraulic extension max theor. capacities. Note relative alle tabelle di carico Note relative alle tabelle carico Remarks referring to loaddicharts Remarks referring to load charts I carichi indicati rispettano la norma EN13000. La gru può lavorare con velocità...

Open the catalog to page 13

Note Note Note Aufzeichnungen Note Notes

Open the catalog to page 14

Note Note Note Aufzeichnungen Note Notes

Open the catalog to page 15

Via Caorsana 49 29122 Piacenza - Italy Tel. ++39.0523.573711 Fax ++39.0523.593253 Web: www.marchetti.it E-mail: [email protected] Per il costante miglioramento del prodotto, dati e caratteristiche tecniche possono variare a nostro giudizio senza alcun obbligo di preavviso. Le informazioni riportate sono solo a titolo indicativo. La messa in servizio della macchina richiede l’osservanza del manuale d’uso e delle tabelle di portata fornite con la macchina. In accordance with our policy of constant improvement, we reserve the right to amend this specification at any time without notice. Data published...

Open the catalog to page 16

MTK 180L

MTK 180L

Catalog excerpts

All MARCHETTI AUTOGRU SPA catalogs and technical brochures