- Catalogs
- MARAN E PERACINI
- 420prox
420prox
420prox
- Manufactured in Italy, compliant with EN 1074 standards.
- Face-to-face length follows EN 558-1, basic series 14.
- Flanged according to EN 1092-2 PN16 with raised face; other specifications available upon request.
- Features inside screw thread with clockwise closing, o-ring packing, and back seats.
- Designed for minimal pressure drop and hydrostatically tested per EN 12266-1: Test type P10-P11-P12 Rate A.
- Complies with Pressure Equipment Directive 2014/68/UE Group 2.
- 100% full bore with EPDM integrally vulcanized wedge.
- Bi-directional gate valves, installable in any position, preferably with the stem vertically upwards.
- Potable water, food industry, water treatment, fire-fighting, and irrigation.
- Integrally fusion bonded epoxy coated in Blue Ral 5015, 250 microns.
| DN | F (mm) | L (mm) | H (mm) | Weight (Kg) | Handwheel Ø (mm) | Turns open/close | Max torque (Nm) | Kvs value |
|---|---|---|---|---|---|---|---|---|
| 40 | 150 | 140 | 191 | 9 | 125 | 10 | 40 | 107 |
| 50 | 165 | 150 | 213 | 10 | 150 | 12.5 | 40 | 250 |
| 65 | 185 | 170 | 236 | 13 | 175 | 16 | 40 | 430 |
| 80 | 200 | 180 | 265 | 16 | 175 | 16 | 50 | 790 |
| 100 | 220 | 190 | 298 | 21 | 200 | 20 | 60 | 1250 |
| 125 | 250 | 200 | 344 | 27 | 200 | 25 | 60 | 1960 |
| 150 | 285 | 210 | 388 | 34 | 225 | 30 | 80 | 2790 |
| 200 | 340 | 230 | 480 | 53 | 250 | 33 | 100 | 2880 |
| 250 | 405 | 250 | 587 | 83 | 300 | 41 | 120 | 4306 |
| 300 | 460 | 270 | 664 | 109 | 350 | 50 | 130 | 6380 |
- Working temperature: -10 to +80 °C.
- Max working pressure: 16 bar.
- Various components made from zinc-plated carbon steel, grey cast iron, drawn brass, stainless steel, PTFE, ductile cast iron, and EPDM.
- Hydrostatically tested according to EN 12266-1 with body test at 24 bar, seat test water at 18 bar, and seat test air at 6 bar.
Catalog excerpts
GATE VALVES Ductile cast iron Gate Valve inside screw soft seating PN16 handwheel operated with proximity and position indicator Main characteristics • Manufactured in Italy in accordance with EN 1074 • Face-to-face length according to EN 558-1, basic series 14 • Flanged according to EN 1092-2 PN16 with raised face (other specifications on request) • Inside screw thread clockwise closing, o-ring packing, back seats provided • Minimal pressure drop • Hydrostatically tested according to EN 12266-1: Test type P10-P11-P12 Rate A • Pressure Equipment Directive 2014/68/UE Group 2 • 100% full bore • EPDM integrally vulcanized wedge • Gate valves are bi-directional and can be installed in any position. However, the preferred orientation is with the stem pointing vertically upwards. Corrosion protection Integrally fusion bonded Epoxy coated Blue Ral 5015 250 microns Potable water Food industry Water treatment Fire-fighting Irrigation Hydrostatically tested according to EN 12266-1 (bar) Working temperature (°C) Max Working pressure (bar) P12 Seat Test water 18 Parts Screw Washer Handwheel Indicator Fork Dust proof packing Nut Stem Back seat Bonnet Gasket Wedge 13 Motherscrew 14 Body 15 Indicator holder 16 O-ring 17 Screw tap 18 Bush 19-21 Prxomity Material Zinc-plated 8.8 carbon steel Zinc-plated carbon steel EN-GJL-250 Grey cast iron CW614N Drawn brass CB 754-S GM Cast brass PVC Zinc-plated 8.8 carbon steel X12Cr13 Stainless Steel Ptfe EN-GJS-400-15 Ductile cast iron Epdm EN-GJS-400-15 Ductile cast iron Epdm integrally Vulcanized CB 754-S GM Cast brass EN-GJS-400-1Ductile cast iron CB 754-S GM Cast brass Epdm Hot Glue CW614N Drawn brass - Specification EN ISO 4762 EN 7092 EN 1561 EN 12164 EN 1982 ISO 4032 AISI 410 ASTM 4894 EN 1563 ISO 4097 Technical data DN F mm L mm H mm Weight Kg Handwheel Ø mm Turns open/close nr Max torque gate closing Nm Kvs value EN_420prox - Edition 09/2017 • Maran Peracini srl assumes no responsibility or liability for typographical errors or omissions and reserves the right to change without notice. MARAN E PERACINI srl Via Valduggia, 25 13011 Borgosesia (VC) - Italy
Open the catalog to page 1
