GATE VALVES Cast iron Gate Valve outside screw brass trim PN16 handwheel operated High Temperature BS 5150/ANSI Class 125 Main characteristics • • • • • • • • • Manufactured in Italy in accordance with BS 5150 Face-to-face length according to EN 558-1, basic series 3 Flanged according to ANSI B16.1with flat face (EN 1092-2 PN 16 available) Outside screw thread clockwise closing, adjustable stuffing box Minimal pressure drop Hydrostatically tested according to EN 12266-1: Test type P11-P12 Rate A Pressure Equipment Directive 2014/68/UE art. 13 Group 2 100% full bore Gate valves are bi-directional and can be installed in any position. However, the preferred orientation is with the stem pointing vertically upwards. Field of application Sprinkler fire fighting system Corrosion protection Externally coated with Phenolic-oil resin with zinc-phosphate high corrosion resistance painting Red Ral 3000 Hydrostatically tested according to EN 12266-1 (bar) Working temperature (°C) Max Working pressure (bar) Parts Lock nut Handwheel Motherscrew Yoke Packing gland Packing Gasket Stem Bonnet Gasket Motherscrew Wedge DN 40-DN 65 Wedge DN 80- DN 300 Seat Body Nut Screw Tie rod Pin DN F mm L mm H mm Weight Kg Handwheel Ø mm Turns open/close nr Max torque gate closing Nm Kvs value Material CW614N EN-GJL-250 Grey cast iron CB 754-S GM Cast brass EN-GJL-250 Grey cast iron EN-GJL-250 Grey cast iron Ptfe Fasit 205 CW614N Drawn brass EN-GJL-250 Grey cast iron Fasit 205 CB 754-S GM Cast brass CB 754-S GM Cast brass EN-GJL-250 Grey cast iron CB 754-S GM Cast brass EN-GJL-250 Grey cast iron Zinc-plated 8.8 carbon steel Zinc-plated 8.8 carbon steel Zinc-plated 8.8 carbon steel Carbon steel P12 Seat Test water 18 EN_240r - Edition 09/2017 • Maran e Peracini srl assumes no responsibility or liability for typographical errors or omissions and reserves the right to change without notice. MARAN E PERACINI srl Via Valduggia, 25 13011 Borgosesia (VC) - Italy