CHECK VALVES Cast iron Swing Check Valve bronze/bronze trim PN16 lever and counterweight High Temperature Main characteristics • Manufactured in Italy in accordance with EN 12334 • Face-to-face length according to EN 558-1, basic series 48 • Flanged according to EN 1092-2 PN16 with raised face, undrilled, PN10 or other specifications on request) • With lever and weight (located on the flow direction) • Horizontal installation • Flow direction indicated by the casted arrow • Minimal pressure drop • Hydrostatically tested according to EN 12266-1: Test type P11-P12 Rate A • Pressure Equipment Directive 2014/68/UE art. 13 Group 1 • 100% full bore • Swing check valves are mono-directional and act automatically the function to stop the return flow of the fluid, without manual action. Corrosion protection Externally coated with Phenolic-oil resin with zinc-phosphate high corrosion resistance painting Grey Ral 7011 Industrial plants Sewage Water Sea Water Aggressive fluids Tanks Shipyard Hydrostatically tested according to EN 12266-1 (bar) Ratings Working temperature (°C) Max Working pressure (bar) P12 Seat Test water 18 Parts Body Screw Hinge Obturator DN 40-DN 100 Obturator DN 125-DN 300 Nut Seat Pin Gasket Bonnet Packing Packing gland Weight Lever Material EN-GJL-250 grey cast iron Zinc-plated 8.8 carbon steel EN-GJL-250 grey cast iron Cast bronze CuSn5Zn5Pb5-B EN-GJL-250 grey cast iron+ Cast bronze CuSn5Zn5Pb5-B Zinc-plated 8.8 carbon steel Cast bronze CuSn5Zn5Pb5-B Stainless Steel X12Cr13 Fasit 205 EN-GJL-250 grey cast iron Ptfe Drawn brass CW614N EN-GJL-250 grey cast iron Carbon steel Technical data DN F mm L mm H mm A mm Weight Kg Kvs value EN_170sblp - Edition 11/2018 • Maran Peracini srl assumes no responsibility or liability for typographical errors or omissions and reserves the right to change without notice. MARAN E PERACINI srl Via Valduggia, 25 13011 Borgosesia (VC) - Italy