165bz
165bz
- Manufactured in Italy, compliant with EN 1171 standards.
- Face-to-face length follows EN 558-1, basic series 14.
- Flanged according to EN 1092-2 PN10 with raised face, undrilled, with options for PN16 or other specifications upon request.
- Features an inside screw quick closing and adjustable stuffing box.
- Designed for minimal pressure drop and hydrostatically tested as per EN 12266-1: Test type P11-P12 Rate B.
- Complies with Pressure Equipment Directive 2014/68/UE art. 13 Group 2.
- 100% full bore, bi-directional installation possible in any position.
- Suitable for industrial plants, sea water, fuel, shipyards, non-aggressive fluids, and tanks.
- Externally coated with phenolic-oil resin and zinc-phosphate for high corrosion resistance, painted in Grey Ral 7011.
| DN | F (mm) | L (mm) | H (mm) | Weight (Kg) | A (mm) | Kvs value |
|---|---|---|---|---|---|---|
| 40 | 150 | 140 | 265 | 10 | 283 | 107 |
| 50 | 165 | 150 | 280 | 12 | 283 | 250 |
| 65 | 185 | 170 | 357 | 16 | 341 | 430 |
| 80 | 200 | 180 | 365 | 18 | 341 | 790 |
| 100 | 220 | 190 | 390 | 23 | 373 | 1,250 |
| 125 | 250 | 200 | 478 | 32 | 396 | 1,960 |
| 150 | 285 | 210 | 545 | 42 | 433 | 2,790 |
| 200 | 340 | 230 | 660 | 68 | 433 | 2,880 |
| 250 | 395 | 250 | 770 | 96 | 676 | 4,306 |
| 300 | 445 | 270 | 895 | 130 | 685 | 6,380 |
- Working temperature range: -10 to +120°C, with a maximum of +150°C.
- Maximum working pressure: 10 bar, reduced to 8 bar at higher temperatures.
- Various components made from materials such as cast brass, grey cast iron, PTFE, drawn brass, and carbon steel, each conforming to specific EN and ASTM standards.
Catalog excerpts
GATE VALVES Cast iron Gate Valve bronze trim PN10 Quick Closing High Temperature Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series 14 • Flanged according to EN 1092-2 PN10 with raised face, undrilled, PN16 or other specifications on request) • Inside screw quick closing, adjustable stuffing box • Minimal pressure drop • Hydrostatically tested according to EN 12266-1: Test type P11-P12 Rate B • Pressure Equipment Directive 2014/68/UE art. 13 Group 2 • 100% full bore • Gate valves are bi-directional and can be installed in any position. Corrosion protection Externally coated with Phenolic-oil resin with zinc-phosphate high corrosion resistance painting Grey Ral 7011 Industrial plants Sea water Fuel Shipyard Non-aggressive fluids Tanks Hydrostatically tested according to EN 12266-1 (bar) Working temperature (°C) Max Working pressure (bar) P12 Seat Test water 11 Parts Fork Packing gland Packing Stuffing box Gasket Stem Bonnet Gasket Motherscrew Wedge DN 40-DN 100 Wedge DN 125-DN 300 Seats Body Nut Screw Tie rod Lever Pin Material CB 754-S GM cast brass EN-GJL-250 grey cast iron Ptfe EN-GJL-250 grey cast iron Fasit 205 Drawn brass CW614N EN-GJL-250 grey cast iron Fasit 205 Cast brass CB 754-S GM Cast bronze CuSn5Zn5Pb5-B EN-GJL-250 grey cast iron Cast bronze CuSn5Zn5Pb5-B EN-GJL-250 grey cast iron Zinc-plated 8.8 carbon steel Zinc-plated 8.8 carbon steel Zinc-plated 8.8 carbon steel Carbon Steel Carbon Steel Technical data DN F mm L mm H mm Weight Kg A mm Kvs value EN_165bz - Edition 11/2018 • Maran Peracini srl assumes no responsibility or liability for typographical errors or omissions and reserves the right to change without notice. MARAN E PERACINI srl Via Valduggia, 25 13011 Borgosesia (VC) - Italy
Open the catalog to page 1
