135htprox
1Pages

GATE VALVES Cast iron Gate Valve inside screw brass trim PN16 handwheel operated High Temperature with proximity and position indicator Main characteristics • Manufactured in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic series 15 • Flanged according to EN 1092-2 PN16 with raised face undrilled, PN10 or other specifications on request • Inside screw thread clockwise closing, adjustable stuffing box • Minimal pressure drop • Hydrostatically tested according to EN 12266-1: Test type P11-P12 Rate A • Pressure Equipment Directive 2014/68/UE Group 2 • 100% full bore • Gate valves are bi-directional and can be installed in any position. However, the preferred orientation is with the stem pointing vertically upwards. Corrosion protection Industrial plants • Standard version: Sewage water externally coated Water treatment with Phenolic-oil resin Air-conditioning systems (HVAC) with zinc-phosphate high corrosion Central heating and resistance painting Grey Ral 7011 cooling circuits • On request: Non-aggressive fluids integrally epoxy coated Tanks • Customized color available Irrigation Fuel Hydrostatically tested according to EN 12266-1 (bar) Ratings Working temperature (°C) Max Working pressure (bar) P12 Seat Test water 18 Parts Screw Washer Handwheel Packing gland Packing Stuffing box Gasket Stem Bonnet Gasket Motherscrew Wedge DN 40-DN 65 Wedge DN 80-DN 300 Seats Body Nut Screw Tie rod Fork Indicator Proximity Material Zinc-plated 8.8 carbon steel Zinc-plated carbon steel EN-GJL-250 grey cast iron EN-GJL-250 grey cast iron Ptfe EN-GJL-250 grey cast iron Fasit 205 Stainless steel X12Cr13 EN-GJL-250 grey cast iron Fasit 205 Cast brass CB 754-S GM Cast brass CB 754-S GM EN-GJL-250 grey cast iron CB 754-S GM cast brass EN-GJL-250 grey cast iron Zinc-plated 8.8 carbon steel Zinc-plated 8.8 carbon steel Zinc-plated 8.8 carbon steel CB 754-S GM Cast brass CW614N Drawn brass - Specification EN ISO 4017 EN 7092 EN 1561 EN 1561 ASTM 4894 EN 1561 AISI 410 EN 1561 EN 1982 EN 1982 EN 1561 DN EN 1982 EN 1561 ISO 4032 EN ISO 4017 EN 1982 EN 12164 - Technical data DN F mm L mm H mm Weight Kg Handwheel Ø mm Turns open/close nr Max torque gate closing Nm Kvs value EN_135htprox - Edition 11/2018 • Maran e Peracini srl assumes no responsibility or liability for typographical errors or omissions and reserves the right to change without notice. MARAN E PERACINI srl Via Valduggia, 25 13011 Borgosesia (VC) - Italy