Competent, Consistent, & Compliant VPure 4400H USP Purified Water System With Hot Water Sanitization The VPure 4400H is a value designed USP grade water system for use in bacteria controlled applications in the Life Science market. The base system is a compact centralized hot water sanitizable RO system and distribution system with an option for Service DI (SDI) or Electrodeionization (EDI) to polish the RO permeate to USP purified water grade. The system generates Purified Water, stores it and delivers it to the loop. The system has a self-contained air compressor and an electric heat exchanger, saving on expensive plant utility integration. Energy saving features have been included to minimize the impact on the environment. Standard Features Distribution System • Sanitary 175 Gallon 316L Stainless Jacketed Distribution Tank Heat Traced Vent Filter Controlled & Monitored by PLC 15 and 30 gpm Distribution Flow Rates Hot Water Sanitizable UV System 0.1 micron, 316L Stainless Multi Tube Filter Housing • On Board & Quiet Air Compressor Air Actuated Spring Return Automated Valves • CSA, UL approved NEMA 4/12 Control Panel Self Adjusting Loop Return Control Valve • Digital Instrument Package: Loop Return Velocity Flow Sensor • Automated Hot Water Sanitization Capability • 2.5, 5.0, 7.5 & 10.0 gpm RO Permeate Flow Rates • Distribution Tank, Pump, UV, and Final Filter • Sanitary 316L Stainless Steel Piping • Sanitary Stainless Steel RO Membrane Vessels • Sanitary Permeate Sample Valves • Manual and Air Actuated Tri Clamp Ball Valves Feed, Reject, Recycle Flow Sensors Prefilter Inlet/Outlet, RO Pump Pressure Sensors Electrical / Instrumentation • High Efficiency Motors with Variable Frequency Drive Allen Bradley Compactlogix • Medical Device Rinsing 10” Color Touch Screen Panelview NIST Traceable Conductivity / Temperature Monitor • Cosmetic Manufacturing Sanitary Product Conductivity / Temperature / Pressure sensors Quick Connect Electrical Connections for Field Interlock Devices Built in Fused Disconnect Uninterruptible Control Power Suppl

Technical Data Standard VPure 4400 H Models @ 75°F ( 25°C) The VPure 4400H is available in 4 standard configurations as listed below: Model Number Feed Flow Distribution Pump There are two additional voltage options available. 208VAC/3PH/60HZ & 600VAC/3PH/60HZ. Flow is based on feed water temperature of 75°F (25°C). Layout & Dimensions Installed Height: 103 inches Available Options • Pre-Treatment • Break Tank / CIP System • Electrodionization (EDI) Polishing System • 316 SS SDI Polishing Tanks • UV and 0.2 micron Final Filter, post Ro, SDI or EDI • TOC Monitoring Loop Return • FAT, SAT, IQ,...