1. Catalogs
  2. Mar Cor Purification
  3. CWP 100 H Water Purification System

CWP 100 H Water Purification System

CWP 100 H Water Purification System

CWP 100 H Water Purification System

Product catalog summary
Overview: The CWP 100 Reverse Osmosis System is designed to deliver AAMI grade water for dialysis, adhering to ANSI/AAMI/ISO 13959:2009 standards. It offers a capacity range from 5,000 to 13,000 gallons per day (GPD) and features automated disinfection processes to minimize microbial contamination.
Key Features:
  • Automated heat disinfection of the distribution loop and chemical disinfection of the RO and membranes.
  • Medical-grade Wirsbo-cleanPEX® distribution system.
  • Direct feed operation with integrated end-to-end heat with the Phoenix® Hemodialysis System.
  • Monitoring software for documentation and verification of disinfection procedures.
  • 510(k)-cleared as a water purification system for hemodialysis.
Optional Components: Mar Cor Purification offers additional components such as blending valves, booster pumps, multi-media filters, water softeners, carbon adsorption units, and test kits for hardness and total chlorine.
Specifications:
  • Output: Models range from 3.4 to 9.3 gallons per minute, depending on the model.
  • Quality: Achieves over 95% rejection of total dissolved salts and over 99% rejection of bacteria and endotoxins.
  • Water Supply: Requires a minimum input flow ranging from 5.3 to 15.9 gallons per minute, with input pressure between 15 to 73 psi.
  • Temperature: Operates between +5˚C to +25˚C, with a maximum of +20˚C if using peracetic acid for disinfection.
  • Power Supply: Main voltage of 120/208 V, 60 Hz, 3-phase, with power ratings varying by model.
  • Dimensions and Weight: Varies by model, with a consistent height of 79.1 inches and depth of 26.4 inches.
Technical Notes: An additional 20 inches of space is required on both sides of the unit for installation and operation.
See more

Catalog excerpts

CWP 100 H Water Purification System-1

Medical Device Reverse Osmosis System 5,000 to 13,000 GPD The CWP 100 offers cost-effective, consistent delivery of AAMI grade water standards according to ANSI/AAMI/ISO 13959:2009, water for dialysis at the point of use. This system is designed to meet all current standards for dialysis quality water. The automated heat disinfection of the distribution loop and the automated chemical disinfection of the RO and membranes simply and easily reduce biofilm development and minimizes levels of endotoxin, fungi, yeast and other microbial contaminants. Greater cost-effectiveness is ensured through system efficiency and labor savings. The CWP represents a simple, convenient, and effective disinfection strategy. Advanced electronics and top quality components also ensure quiet, reliable, and safe operation. Optional Items Standard Features • • Hot water loop disinfection Medical-grade Wirsbo-cleanPEX® distribution system Mar Cor Purification offers a complete line of components and accessories, including: • Blending Valves and Booster Pumps Direct feed operation Multi-Media Filters Automated disinfection of the loop and RO membrane Water Softeners Carbon Adsorption Hardness and Total Chlorine Test Kits AAMI Water Analysis Chemical Disinfectants Integrated end-to-end heat with the Phoenix Hemodialysis System Monitoring software for documentation and verification of disinfection procedures 510(k)-cleared as a water purification system for hemodialysis

 Open the catalog to page 1
CWP 100 H Water Purification System-2

Technical Data CWP 100 Specifications Product Water - Minimum capacity at 20˚C and at a pure water outlet pressure of 29 psi(200 kPa) Model Part Number Product Water in gallons/min (l/min) Depends on inlet water quality. The system is designed to utilize drinking water that meets the standards of the Safe Drinking Water Act, 40 CFR. Additional pretreatment of inlet water is required. A properly maintained system using inlet water meeting SDWA can obtain the following rejection rates: Total dissolved salts > 95 % • Bacteria (CFU) & endotoxins > 99 % • Water conversion factor 67 % Water Supply...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.