GENERAL INFORMATION Hemodialysis providers and patients around the world depend on the 23G reverse osmosis system for push button simplicity and reliability. The 23G Series RO is designed and tested to meet AAMI grade water standards according to ANSI/AAMI 13959 for RO product water. SYSTEM FEATURES • Quiet TEFC high efficiency pump • Free standing design makes installation and maintenance easy • Auto inlet shut-off valve • Autoflush system • Unique expandable frame to increase output • Adjustable Flow Block • Quality tested spiral wound elements • Quick-connect permeate manifold service ports • Centralized, user friendly monitoring panel • Permeate divert to ensure high quality product • Chemically compatible with 1% Minncare® HD Disinfectant solution • Remote Alarm • Set of Locking casters OPERATING PARAMETERS • Control Voltage: 115 VAC 60 Hz; 220 VAC 50 Hz Single-Phase • Membrane: HR (PA) Thin Film Composite • Rejection Ionic: 95-98% (Assumes typical water with mono & polyvalent salt mix) • Materials: All Wetted Materials are Stainless Steel or Inert Plastic • Alarm Message Center: Alarm messages, maintenance reminders, interfaces with system operations and displays date and time • High-contrast LCD module with LED backlighting • User-adjustable alarm limits and timers AVAILABLE OPTIONS • Chemical feed system • Expansion kits

Free Chlorine Level pH • Langalier Saturation Index (LSI) as calculated on concentrate total dissolved solids (TDS) must be negative. • Permeate flows vary with temperature; all model capacities nominally rated at 77°F (25°C). At the heart of the 23G RO System is the ECM-100. This solid state controller / monitor is user-friendly. The liquid crystal display (LCD) makes it easy to see operating parameters. Everything is conveniently displayed in one easy-to-find location. The unique Alarm Message Center identifies individual alarms and helps facilitate corrective action. Visit mcpur.com for more...