CT-Fix
CT-Fix
- Precision down to the smallest detail.
- Maintenance-free components.
- Efficient measurement process.
- Adapter Plate (Optional): Item No. 10000.320, Dimensions: Ø 190 x 18 mm. Used for centering CT-Fix components on the measuring plate.
- Centering Pin (Optional): Item No. 10000.321, Diameter: Ø 3.0 mm. Visible in measurement results for precise center definition.
- Extension Ring: Item No. 10000.340, Dimensions: Ø 125 x 50 mm, Usable Ø 67 mm. Used for longer measuring objects.
- Divider: Item No. 10000.350. Used to position multiple small objects or longer parts.
- Funnel: Item No. 10000.330, Dimensions: Ø 125 x 50 mm, Usable Ø 70 mm. Allows measurement of multiple objects simultaneously.
- Use only in industrial environments.
- Read and observe operating instructions.
- Follow all instructions carefully.
- Adapter Plate: Positions components in the measuring funnel.
- Funnel: Holds objects for measurement, allowing stacking for multiple objects.
- Divider: Positions multiple small objects or longer parts with intermediate rings.
- Centering Pin: Ensures precise center definition in measurements.
- Extension Ring: Stacks on the funnel for longer objects.
Catalog excerpts
CT-FixObject holder for X-ray tomography • Precision down to the smallest detail • Perfectly suitable polystyrene volume • CT friendly geometry / design swiss made
Open the catalog to page 1
• positioning of measurement objects • maintenance-free • efficient measurement process Safety instructions • The components may only be used in industrial environment • Read and observe the operating instructions If necessary, clean the parts with a soft, dry cloth before use. Do not use aggressive cleaning agents! must not be used! Type Item No. Dimensions [mm] Adapter plate (optional) 10000.320 (0 x H) 190 x 18 Extension ring 10000.340 (0 x H) 125 x 50 usable 0 67 Type Item No. Dimensions [mm] Adapter plate (optional) 10000.320 (0 x H) 190 x 18 Extension ring 10000.341 (0 x H) 190 x 80 usable...
Open the catalog to page 2
Measurement in a 3D coordinate measuring machine with X-ray computed tomography (CT) Type Possible applications The objects to be measured are placed in the funnel. By stacking several funnels, several objects to be measured can be measured at the same time. Possible applications Dividers are used to position several small objects to be measured in the funnel or to position longer parts together with intermediate rings. Possible applications The centering pin is inserted through the hole in the funnel or divider as required. Thanks to its higher density, it is visible in the measurement result...
Open the catalog to page 3
TRANSFORMING YOUR GOOD IDEAS INTO GREAT SOLUTIONS Maprox AG swiss made [email protected] • www.maprox.ch
Open the catalog to page 4All Maprox AG catalogs and technical brochures
Vacuum-Clamping4 Pages
Product overview64 Pages
E-Chuck - for automation4 Pages
Clamp-Fix4 Pages
6 ZK 30 Mini4 Pages
Product overview 20254 Pages
- Cylinder
- Chuck
- Clamping device
- Pneumatic cylinder
- Torque wrench
- Vice
- Machine vise
- Clamping device
- Screwdriver
- DIN chuck
- Collet chuck
- Workpiece clamping chuck
- Collet tool holder
- Rotary indexing table
- Clamping cylinder
- 3-jaw workpiece clamping chuck
- Machining collet chuck
- ER collet chuck
- Base plate
- Anti-corrosion cylinder