© MAPLAN 09/2012 | We reserve the right to technical modifications Technical data MAPLAN MTF/MBF vertical C-frame series Standard Design ` 8.8 Microprocessor control PC50touch Control pump with proportional pressure- and quantity control Electronic measuring system for ejector on injection and clamp side Cooling device (thermal oil) for plasticising cylinder and injection pot, incl. temperature regulation Certified dosing accuracy 2-hand operation Cooled nozzle Options Hydraulic ejector on the top and/or bottom Pneumatic safety gate on three sides Tempering unit (water or oil) for plasticising cylinder and injection pot, incl. temperature control Vacuum pump Electric oil temperature monitoring Electric oil level monitoring Electric oil filter monitoring Electric dynamic pressure Heater current monitoring Automatic strip intake device Strip intake control Additional mould heating Enlarged heating plates Customer-specific special solutions Levelling feet Fast hydraulics (from 27 t) Other options on request Alternative injection volumes Long nozzle Short nozzle Machine type Clamping unit Opening stroke rubber injection technology Clamping force Heating plates, standard (w x d) Injection unit Injection pressure bar Injection volume standard Injection volumes alternativ Machine weight approx. Floor space required Further injection volumes on request MAPLAN GmbH Schoellergasse 9 2630 Ternitz, Austria T: + 43 2630 35706 F: + 43 2630 35408 [email protected] www.maplan.at MAPLAN C-frame VERTICAL MACHINE SERIES THE RELIABLE COMPACT TIE-BAR-LESS SMALL MACHINE IN C-FRAME DESIGN FOR SMALL BATCH PRODUCTION AND CORNER VULCANISATION

Machine pictured may include equipment sold as options. Machine pictured may include equipment sold as options. MTF/MBF C-frame The MAPLAN FIFO rubber injection unit ● FIFO injection unit concept ● Short nozzle for maximum injection pressure directly at the mould ● Cooled nozzle – nozzle retraction not necessary ● Simple change of material through retractable plasticising unit ● Oil temperature control for plasticising unit, injection pot and nozzle The MAPLAN C-frame injection moulding machine is available in designs that clamp from above or from below! It is freely accessible from three sides,...