CUT PROTECTION > Heavy-duty work DESCRIPTION AND GENERAL PROPERTIES • Material Nitrile GRIP&PROOF coating • Length (cm) 23.5 - 27.5 • Wrist Safety cuff • Colour/Color Orange • Interior finish Seamless textile support from HDPE fibres • Exterior finish Ventilated back • Size / EAN 7 8 9 10 11 • Packaging 1 pair/bag - 12 pairs/bag - 48 pairs/carton PERFORMANCE RESULTS ISO 13997 defines the weight on the blade required to cut in a single movement. Data was obtained according to ISO 13997, from the average of several measurements. As Individual specimens will obviously have greater or lesser cut resistance than the average, so this result can provide only a general indication of the cut resistance of any protective material. © PERFORMANCE LEVELS 0-4 0-5 0-4 0-4 A-F (P) Impact protection Cut resistance according to ISO 13997 Puncture resistance Tear resistance Blade cut resistance Abrasion resistance EN 407 THERMAL RISKS heat and fire PERFORMANCE LEVELS 0-4 0-4 0-4 0-4 0-4 0-4 CHEMICAL RISKS MICRO-ORGANISMS EN ISO 374-1 EN ISO 374-1 EN ISO 374-1 EN ISO 374-5 Type A Type B W X Y Z Type C Potection against bacteria, fungi EN ISO 374-5 A Methanol B Acetone C Acetonitrile D Dichloromethane E Carbon Disulfide F Toluene G Diethylamine H Tetrahydrofurane I Ethyl acetate J n-Heptane K Sodium hydroxide 40% L Sulphuric acid 96% M Nitric acid 65% N Acetic acid 99% O Ammonia 25% P Hydrogen peroxide 30% S Hydrofluoric acid 40% T Formaldehyde 37% VIRUS Potection against bacteria, fungi, virus Resistance to large quantities of molten metal Resistance to small drops of molten metal Radiant heat resistant Convective heat resistance Contact heat resistance Burning behaviour EN 511 COLD HAZARDS PERFORMANCE LEVELS 0-4 0-4 0 or 1 Water permeability Contact cold resistance Convective cold resistance EN 421 RADIOACTIVE CONTAMINATION For more details: www.mapa-pro.com MARA PROFESSIONNEL www.mapa-pro.com

SPECIFIC ADVANTAGES • Shock protection : specific areas are reinforced to bring cushioning protection and comfort where you need it (Upper thumb, Knuckles, Base fingers & Palm) • Durability in use : Long lasting coating, gloves stay clean due to their liquid resistance, suppleness guaranteed even after drying • Grip overtime thanks to our specific technology • Grease & Oilproof for better skin protection thanks to our specific technology • High cut protection Recycling • Handling heavy parts with cut risk • Maintenance with cut risk Electrical equipment • Assembling of heavy parts • Handling...