your latest Selection Guide that works For the job in hand, there is a Maps glove

TEST METHODS • Circular saw exerts a constant low cutting • Moves horizontally back and forth over the surface of the sample to be tested. • To adjust for the sharpness of the blade, the test is carried out using a cotton control material. It measures and compares the number of times (cycles) the blade passes before cutting firstly the sample, and secondly the control material. • The test result is expressed as an index. Standard EN 388 describes the test and defines the performance levels corresponding to each index. The index is calculated as the ratio of the number of cycles required to cut...

For the job in hand there is a Mapa glove The Mapa Professionnel range of cut-protection gloves provides excellent hand comfort and protection specially designed for various types of work involving cut hazards. Select your cut protection gloves according to your specific needs: - For precision work, you need gloves that act like a second skin, protecting against cuts but maintaining excellent dexterity. - For heavy handling work, your gloves must protect against cuts and impacts but also need to be tough and long lasting. The higher the performance level, the better the glove resists the combined...

very intricate reasonably clean reasonably dean Nitrile palm Full nitrile work requiring dexterity outside Nitrile palm, intricate handling Nitrile palm, aramide fibres protection. Suitable knitted matrix strength fibres handling heavy, oily environments knitted matrix strength fibres palm with forefinger / nail Textile / para- aramide fibre Textile / para- HDPE fibre Full nitrile long-term liquid- strength fibres Nitrile coated *Hnneywell registered trademark Your distributor: MAPA PROFESSIONNEL UNITED KINFDOM MAPA PROFESSIONNEL OTHER COUNTRIES