TRANSFORMERS & INDTUCTORS
59Pages

^JIIIL Manutech Inc. www.manutech.us Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@man utec h.us

• Stators • Electro-Mechanical Assemblies • Wire Harnesses • Printed Circuit Board Assembly Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@ manutech. us

Axial & Radial Inductors Toroidal Inductors MN363 Toroidal Inductors Common Mode Inductors Current Sense Devices SCT1250 Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@ manutech. us JIIIL Manutech Inc. www.manutech.us

Ferrite Coilforms Features • Axial leaded coilforms and bobbins are ideal for wound inductors. • Inductance L in milli Henries can be calculated by the formula: L = N2 Al where N is the number of turns, AI is the inductance factor in nano Henries. Manutech Material Fig. A B C AL Part Number Dimension Dimension Dimension Value All specifications are subject to change without notice • Can be customized to your specific application www.manutech.usPhone: (305) 888-2800 • Fax: (305) 888-2628 sales@man utec h.us - 42 -

Standard Headers• Transformers and inductors can be supplied on any of the headers on this page. • Please contact our engineering department for help with your design. Part LENGTH WIDTH THICK DIA. All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@ manutech. us

ETD, Power Transformers Features • Voltage input 72 Volts. • 240 Watts output. • Outputs from 3 to 24 volts. • UL and VDE standard. • Custom designs available. • Primary Inductance 260 juH. All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@man utec h.us

50/60 Hz Power TransformersFeatures • Ideal for PCB plug in. • Two models with same electrical specifications. • Steel laminations in vertical (V) or horizontal (H) position. • UL and international standards. 1. When ordering, please add “V” for Vertical or “H” for Horizontal at the end of the part number to indicate your preferred position of steel laminations. All specifications are subject to change without notice • Can be customized to your specific application www.manutech.us Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@man utec h.us

ER, Standard Custom Packages Applications • Audio • Pulse • Switchmode • Wideband • Surface Mount All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@man utec h.us

EP, Standard Custom Packages ® ® ® Applications • Audio • Pulse • T1 • ADSL • Switchmode • Wideband All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@man utec h.us

EFD, Standard Custom Packages .770 [19.56mm] MAX. • Standard packages for custom made transformers. • Applications include switchmode transformers and inductors. All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@ manutech. us

Manutech Part Number Power Watts International 50/60 Hz Transformers MN603 Secondaries in Series Features • Power from 2.5 Watts to 56 Watts. • Shrouded construction over windings. • Meets UL, CSA, IEC, and VDE standards. • 4000 Volt isolation. • Input 115 Volt, 50 or 60 Hz. • Other values are available. *—“jnrtnr 0.157 MIN A ^|Ak- ir^ii X,, ,,.r e «d- (Bottom View) All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@ manutech. us JIIIL Manutech Inc.www.manutech.us - 43 -

Shielded Power Inductors Features • Shielded inductor with minimum EMI • Minimum power loss • Non standard values available • Low DC resistance • Flat top for SMT operations Specifications • Inductance tested at 100KHz and zero DC Bias • Operating temperature -40 C to +85 C • 40 C temperature rise rated current Manutech Rated Current Part L=^H DCR Current 10% drop All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@ manutech. us

Pulse Transformers Features • Turns ratio primary to secondary 1: 1.5 • DC resistance between 1 to 2 is 1.5 Ohm max. • Inductance L between 3 to 4 is 7 mH min. • Leakage Inductance between 1 to 2 with 3 and 4 shorted is 6 juH max. • Common mode rejection between primary and secondary is 50 dB minimum. • The rise time is less than 90 nanoseconds. • Custom designs and values are available. All specifications are subject to change without notice • Can be customized to your specific application Phone: (305) 888-2800 • Fax: (305) 888-2628 sales@man utec h.us

AC Current Sense Transformers • From 0.1 to 5 Amps @ 50 Hz • Ultra sensitive for low current measurement. • UL and VDE recognized class B material. • Other current rating and specifications available. • From 50 Hz to 400 Hz. Secondary 2000 turns. Winding DCR: 150 Ohms max. Suggested burden resistor: 100 Ohms. AC output voltage proportional to AC current input. • Output at 100 Ohms: 50 mV/Amp. • Various ranges of output are achievable by using different burden resistors. PRIMARY CURRENT RMS All dimensions are in inches. All specifications are subject to change without notice • Can be...

AC Current Sense Transformers Features • Current sense transformer from 0.01 to 30 Amps RMS • Frequency range from 50 Hz to 400 Hz • Meets IEC 950 standards • Dielectric strength 3000 volts Specifications • Turns ratio: Primary to secondary 3:2000. • Primary DCR: 440 Micro-Ohms max. • Secondary DCR: 300 Ohms max. • Suggested burden resistor: 100 Ohms. • Output 110 mV/Amps. PRIMARY CURRENT RMS All dimensions are in inches. All specifications are subject to change without notice • Can be customized to your specific application