QUICK COUPLINGS
194Pages

{{requestButtons}}

Catalog excerpts

QUICK COUPLINGS - 3

Q.SAFE QUICK COUPLINGS INTRODUCTION Q.Safe is the Manuli Hydraulics offering for quick coupling applications. Composed of an ever-expanding range of products, the Q.Safe brand has rapidly become an industry byword for quality and performance. The entire Q.Safe product range is manufactured with our E-Coat 500 treatment which provides an environmentally friendly surface coating (chrome free) far exceeding ISO 4520 requirements (salt spray resistance: 240 hours for white corrosion and 500 for red corrosion). Some Q.Safe products also have the option to upgrade to our new E-Coat 1000 plating...

Open the catalog to page 3
QUICK COUPLINGS - 4

Q.SAFE QUICK COUPLINGS QUICK COUPLING SELECTION To ensure that you select the correct quick coupling for your needs, Manuli Hydraulics recommends that the following factors be considered: Pressure and Flow Rate - The selected quick coupling must always be suitable for the pressure and flow rate in the system. Always check that the selected quick coupling’s maximum working pressure is equal to or greater than the maximum pressure of the system (including pressure spikes). Connection Under Pressure - Many quick couplings can only be connected / disconnected when the line pressure has been...

Open the catalog to page 4
QUICK COUPLINGS - 5

Q.SAFE QUICK COUPLINGS MQS-DHI “DIRECT HOSE INTEGRATION” An innovative system to enable direct assembly of the quick-release coupling to the flexible hose, and therefore avoiding intermediate connection elements. Some of the benefits of this solution are: •  Reduced risk of oil leakage •  Elimination of unscrewing problems in the field •  Reduction in the number of assembly elements leading to reduced assembly cost, minimised risk of assembly operation mistakes and greater safety in severe working conditions, as well as easier maintenance and replacement operations Design solutions are...

Open the catalog to page 5
QUICK COUPLINGS - 6

Q.SAFE INDEX Q.SAFE QUICK COUPLINGS QUICK COUPLINGS SERIES FEMALE MALE SHUT-OFF SYSTEM SHIELDED POPPET POPPET VALVE BALL VALVE SIZE SPECIFICATIONS CONNECTION ISO 7241 SERIES A LOCKING BALLS POPPET VALVE ISO 7241 SERIES A LOCKING BALLS ISO A CONNECTABLE WITH MALE UNDER PRESSURE POPPET VALVE ISO 7241 SERIES A LOCKING BALLS ISO A CONNECTABLE WITH BOTH PARTS UNDER PRESSURE POPPET VALVE ISO 7241 SERIES A LOCKING BALLS POPPET VALVE ISO 7241 SERIES B LOCKING BALLS ISO 7241 SERIES B POPPET VALVE + FLAME TEST RES. LOCKING BALLS TO API 16D POPPET VALVE ISO A CONNECTABLE UNDER PRESSURE BALL VALVE...

Open the catalog to page 6
QUICK COUPLINGS - 7

Q.SAFE INDEX QUICK COUPLINGS SERIES FLAT VALVE LOCKING BALLS FLAT VALVE ISO 16028 E HTMA (ONLY 3/8” SIZE) LOCKING BALLS FLAT-FACE HIGH PRESSURE FLAT VALVE ISO 16028 E HTMA (ONLY 3/8" SIZE) LOCKING BALLS FLAT-FACE CONNECTABLE UNDER PRESSURE FLAT VALVE ISO 16028 E HTMA (ONLY 3/8” SIZE) LOCKING BALLS FLAT-FACE SCREW TYPE FLAT VALVE MANULI STANDARDS SCREW-ON SLEEVE POPPET VALVE GERMAN MARKET INTERCHANGEABLE ISO 14541 (FROM 3/8" TO 3/4") SCREW-ON SLEEVE SCREW HEAVY DUTY POPPET VALVE GERMAN MARKET INTERCHANGEABLE ISO 14541 (FROM 3/8" TO 3/4") SCREW-ON SLEEVE SCREW HEAVY DUTY POPPET VALVE FRENCH...

Open the catalog to page 7
QUICK COUPLINGS - 8

Q.SAFE INDEX Q.SAFE MULTICONNECTORS MULTICOUPLING SERIES MULTICOUPLING SERIES PAGE inch Dash No. inch Dash Q.SAFE ACCESSORIES SIZE ACCESSORY TYPE

Open the catalog to page 8
QUICK COUPLINGS - 9

MQS-A TYPE Pressure Drop Pressure Drop [PSI] Pressure Drop Flow Rate [US gallons/min] WORKING PRESSURE (Dynamic) RATED FLOW at 0.2 MPa of pressure drop OIL SPILLAGE CONNECTION Connection/ EFFORT Disconnection CONNECTION/ DISCONNECTION UNDER PRESSURE MINIMUM BURST PRESSURE Male cubic inch MPa PSI The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow PRODUCT DESCRIPTION • • • • • • Reference series on the agriculture and industrial market Simple connection and disconnection by pulling back the sleeve Positive, quick...

Open the catalog to page 9
QUICK COUPLINGS - 10

MQS-A TYPE BSPT TERMINATION ENDS TO ISO 7-1 TAPERED PART NUMBER Female coupling Male coupling PART NUMBER Female coupling Male coupling

Open the catalog to page 10
QUICK COUPLINGS - 11

MQS-A TYPE BSP TERMINATION ENDS TO DIN 3852 X TYPE PART NUMBER Female coupling Male coupling METRIC TERMINATION ENDS TO ISO 8434-1 L SERIES PART NUMBER Female coupling Male coupling

Open the catalog to page 11
QUICK COUPLINGS - 12

MQS-A TYPE METRIC TERMINATION ENDS TO ISO 8434-1 S SERIES PART NUMBER Female coupling Male coupling METRIC TERMINATION ENDS TO ISO 6149-1 PART NUMBER Female coupling Male coupling

Open the catalog to page 12
QUICK COUPLINGS - 13

MQS-A TYPE METRIC TERMINATION ENDS TO ISO 8434-1 BULKHEAD L SERIES PART NUMBER Inch Dash Female coupling Male coupling METRIC TERMINATION ENDS TO ISO 8434-1 BULKHEAD S SERIES PART NUMBER Inch Dash Female coupling Male coupling

Open the catalog to page 13
QUICK COUPLINGS - 14

MQS-A TYPE METRIC TERMINATION ENDS TO ISO 3852-1 X TYPE PART NUMBER Female coupling Male coupling NPTF TERMINATION ENDS TO ANSI B 1.20.3 PART NUMBER Female coupling Male coupling 1/4" NPTF 3/8" NPTF 1/2" NPTF 1/2" NPTF 3/4" NPTF 3/4" NPTF 1" NPTF 1.1/4" NPTF 1.1/2" NPTF PART NUMBER Female coupling Male coupling

Open the catalog to page 14
QUICK COUPLINGS - 15

MQS-A TYPE PART NUMBER Female coupling Male coupling SAE TERMINATION ENDS TO ISO 8434-2 BULKHEAD PART NUMBER Female coupling Male coupling PART NUMBER Female coupling Male coupling ORB TERMINATION ENDS TO SAE J1926-2 S SERIES

Open the catalog to page 15
QUICK COUPLINGS - 16

MQS-A TYPE ORFS TERMINATION ENDS TO ISO 8434-3 F PART NUMBER Female coupling Male coupling

Open the catalog to page 16
QUICK COUPLINGS - 17

MQS-A TYPE ISO A SHIELDED POPPET VALVES Q00411041A BSP TERMINATION ENDS TO DIN 3852 X TYPE PART NUMBER Male coupling NPTF TERMINATION ENDS TO ANSI B 1.20.3 PART NUMBER Male coupling PART NUMBER Male coupling

Open the catalog to page 17
QUICK COUPLINGS - 18

MQS-A TYPE Pressure Drop Pressure Drop [PSI] Pressure Drop Flow Rate [l/min] Flow Rate [US gallons/min] WORKING PRESSURE (Dynamic) RATED FLOW at 0.2 MPa of pressure drop OIL SPILLAGE CONNECTION Connection/ EFFORT Disconnection CONNECTION/ DISCONNECTION UNDER PRESSURE MINIMUM BURST PRESSURE Male cubic inch MPa PSI The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow PRODUCT DESCRIPTION Female couplings in steel, with some hardened areas, in correspondence to the most stressed points. Male couplings in high grade...

Open the catalog to page 18

All MANULI HYDRAULICS catalogs and technical brochures

  1. Infinity

    8 Pages

  2. MQS-FEH

    8 Pages

  3. QUICK COUPLINGS

    174 Pages

  4. FITTINGS

    338 Pages

  5. HOSES

    86 Pages

  6. safe range

    7 Pages

  7. Adaptors

    112 Pages

  8. quick couplings

    152 Pages

  9. fittings

    128 Pages

  10. hoses

    118 Pages