Catalogs >
Mantracourt Electronics Ltd >
X24-SAe Product sheet

X24-SAe Product sheet
2Pages

Catalog excerpts

X24-SAe X24-SAe ATEX / IECEx Telemetry Strain Transmitter OEM Module Introduction ATEX / IECEx telemetry transmitter module measures strain input and periodically transmits data for receipt by X24 or T24 receivers. PCB module provides OEM sensor manufacturers with a quick route to manufacture and supply approved strain bridge sensor products. This intrinsically safe board is approved for both Gas Zone 1 and 2 and Dust Zones 21 and 22. High accuracy ratio-metric input allows for calibration and linearisation for pressure, torque, force and weight measurement in explosive atmospheres. The X24-SAe provides 5 V excitation to drive transducer loads down to 85 ohms. This transmitter is highly accurate, low noise and uses up to nine point linearisation giving quality measurements from a wide range of strain bridge transducers. Product Features OEM Capabilities High performance PCB for OEM integration The OEM product X24-SAe has component approvals which allow holders of a QAN or a QAR to “fast track” the design and manufacture of their own ATEX/IECEx products through the equipment certification process using a notified body such as BASEFA, CSA group or UL. Intrinsically Safe Electronics Approved for use in explosive atmospheres Zone 1, Zone 2, Zone 21, Zone 22 Long Range Transmission Wireless range of up to 800 m (½ mile) Power Efficient Long battery life of up to 5 years High Quality Measurement Calibration and linearisation to engineering units Cross Compatible Operates with X24 and T24 receivers I M2 Ex ib I X24-ACMi-SA ATEX / IECEx Telemetry Strain Transmitter Module X24-HD ATEX / IECEx Handheld Telemetry Display Extend Your Capabilities with our T24 Wireless Modular System T24 Adaptable and expandable system for safe zones. Certified transmitters send to ‘safe zone’ base stations, gateways, analogue and digital outputs. Find out more at wirelesssensorsyst

Open the catalog to page 1

Specification with 1000R bridge, 2.5mV/V, at 3V supply at 25°C Measurement Specifications Environmental Specifications Power Supply Power Supply Voltage 2.1 to 3.6 Vd 1. Power supply must be capable of supplying 300 mA for 250 ps (Required on start-up, waking and during low power operation) Battery Life in Low Power Mode with 350R Load Cell Electrical Bridge 85 ohm to 5000 ohm L J Pair Energizer L91 Lithium AA cells Battery Life Constantly on transmitting at 3Hz 30 days 12 sessions per day of 5 minutes at 3Hz 2 years Constantly on transmitting every 20 secs 5 years Order...

Open the catalog to page 2