SERIALDIS Product sheet

Product catalog summary

Overview: The SerialDIS is a Serial ASCII Display Module designed to display serial ASCII data on a 6-digit, 7-segment LED display. It supports both single and multidrop devices and is suitable for applications in agriculture and the silo & weighing industry. The module is compatible with Mantracourt's DCell, DSC, and T24-SO modules.

User Benefits:

Supports single or multidrop devices.
Comes with a 3-year warranty.

Specifications:

Display: 6-digit, 7-segment LED, 20mm height.
Input: RS232 or RS485 serial ASCII.
Enclosure: IP65 / NEMA 4, dimensions 160 x 80 x 55 mm.

Environmental Specifications:

Storage Temperature: -20 to +70ºC.
Operating Temperature: -10 to +50ºC.
Relative Humidity: 95% maximum non-condensing.
IP Rating: IP65.

Compliance:

European EMC Directive 2004/108/EC.
Low Voltage Directive 2006/95/EC.

Case Study: A company required a wireless monitoring solution for silos without needing a permanent PC connection. The solution involved using load cells connected to T24-ACM-SA modules, transmitting data wirelessly to a T24-SO, which then displayed the data on a SERIALDIS LED display mounted on each silo.

Contact Information: For more details, contact Mantracourt Electronics Ltd at [email protected] or call +44 (0)1395 232020.

Catalog excerpts

SERIALDIS Serial ASCII Display Module User Benefits Data input display for digital load cells and wireless Supporting single or multidrop devices Introduction This display module accepts serial ASCII data and puts this data onto the LED display. All numeric data can be displayed but also a limited set of alpha characters so simple warnings and messages can be shown. By sending binary data the device can be addressed for multidrop operation and also the LEDs on the front panel can be controlled. This display can be used in conjunction with Mantracourt DCell, DSC and T24-SO modules. Silo & Weighing Industry 6 digit 7 segment LED 20mm display RS232 or RS485 serial ASCII input IP65 / NEMA 4 enclosure dimensions 160 x 80 x 55 mm SerialDIS Product Sheet

Open the catalog to page 1

T24-SO Radio telemetry input, data output for displays and printers T24-SA Acquisition Module Strain gauge to radio telemetry converter T24 Acquisition Module Enclosures DCell Strain gauge to radio Embedded digital load cell converter, telemetry converter RS485, Modbus, CAN DSC Strain gauge data converter to RS232. Modbus, CAN, RS485 The Application: A company was looking for an effective way of wirelessly monitoring individual silos with a simple display without the need for permanent connection to a dedicated PC or complicated PC software. The Solution The solution was achieved by...

Open the catalog to page 2