LCI Load Cell Integrity Junction Box & Fault Monitoring Alarm , Introduction r i Product Features • Increased Safety: Fault monitoring capabilities provide a safe working system in critical applications by continuous sampling of load cell channels • Cost and Time Savings: Reduction of down-time via immediate alarm and fault diagnosis • System Protection: Avoids material shortage, overflow, or incorrect batching due to load cell damage or cable faults • Low Power Consumption: Now available in 5V excitation which requires less power • Avoids batch wastage and product recall • Aids installation and commissioning The LCI load cell failure alarm is designed to continuously monitor the condition of individual load cells and activate an alarm when faults in the system are detected, therefore providing increased safety and cost savings onsite for all weighing systems. The latest version of the LCI now supports both 5V and 10V operation. 5V operation requires less power consumption from the connected instrument and simplifies barrier selection. It provides protection for multi-load cell installations such as silos, tanks and other systems where the failure of an individual load cell can have serious consequences such as material shortage, overflow, or incorrect production batching. The device constantly samples the individual load cell channels and activates an alarm if any failure conditions are detected, ensuring a safe working system. The LCI should be used in conjunction with a host intelligent weighing instrument such as Mantracourt's ADW15, LCA20, LCD20, SMW etc. as well as suitable third-party products. LCP LCI PCB board without enclosure JBA (JPP PCB only) Active summing load cell junction box ADW15 Digital Panel Meter for Process Inputs SMW Weighing Indicator & Controller Bulkhead LCD20 Load Cell DIN Rail Signal Amplifier LCA20 Load Cell Amplifier with Display

Specifications Electrical Specifications *Note 1: Derived from Host Instrument *Note 2: Excluding Load Cell Excitation Current "(*LCI Display Only)" denoted that the specification applies to the on-board display only, not the Host instrument. IP65 ABS field case fitted with six M16 cable glands Cable diameter: 4mm (0.16") to 7mm (0.27") , Electrical Approvals LCI LCI supplied in IP65 ABS Enclosure with Transparent Lid LCP LCI OEM without enclosure (PCB only) Industry Canada Industrie Canada Mantracourt Electronics Ltd The Drive, Farringdon Exeter, Devon, UK EX5 2JB LCI Product Sheet Issue 2.0...