JBA Load Cell Active Junction Box User Benefits The function of this strain gauge active junction box is to enable easy adjustment of strain gauge (output) manufacturing tolerances without any channel interaction to give a summated output Individual gain adjustment provided for each channel Simplifies installation of multi-cell platforms, silos, tanks and hopper weighing systems The load cell junction box (JBA) is an active summing junction box for up to four load cells. The summing load cell junction box is an active summing junction circuit that accepts inputs from any strain gauge based sensor (load cell, force sensors, pressure sensor, torque sensor) and applies individual gain adjustment before combining them to provide a calibrated and summed output. Individual channel gains can be set up via DIL switches and preset potentiometers to allow for 2, 3 or 4 strain gauges For a simple summing circuit with no trimming and no corner compensation, use the Passive Load Cell Junction board, (JPP) and for fault monitoring and fault detection alarm features, use the Load Cell Junction Box with Fault Monitoring, (LCI). Silo & Weighing Industry Sums the outputs from up to 4 x 350 -1000 Ohm strain gauge load cells No interaction between offset and gain No interaction between channels during calibration Wide input range - from 0.5 to 20 mV/V Enclosure options are ABS, die caste, aluminium, stainless steel sealed to IP65 / NEMA 4

ADW15 Weighing indicator with analogue, data and relay outputs SMW Weighing indicator and weight controller CE Environmental Approvals European EMC Directive IP Rating For more information contact us today... mantracourt.com [email protected] Mantracourt Electronics Ltd The Drive, Farringdon, Exeter, Devon, EX5 2JB, UK tel: +44 (0) 1395 232020 fax: +44 (0) 1395 233190 In the interests of continued product development, Mantracourt Electronics Limited reserves the right to alter product specifications without prior notice Industry Canada Industrie Canada JBA Product Sheet Issue 1.9 15-06-16 mantracourt.com [email protected]...