DSJ4 Strain Gauge or Load Cell Digitiser Module (4 Channel) Designed to enable the easy connection of up to 4 load cells and 4 DSC cards to a multi-dropped digital communications bus IP65 / NEMA 4 case for 1 digitiser module DIN rail fixture optional Ideal Applications Up to 32 DSJ4s can be connected to 1 digital bus. The communications output connection is RS485 or CAN, please note* that RS232 is NOT available with this unit. (Refer to DSJ1) Option to terminate bus through 120 ohm resistor Bus connections for communication and power supply Bus connection via 2 part screw connectors Daisy chain bus through D type connectors 2 part connectors for load cells CAN compliant option 3 x screen clamps for EMC termination Cable length DSJ4 to load cell 3 m Cable length of digital data 1000 m DSJ4 PCB dimensions 100 x183 mm IP65 / NEMA 4 enclosure dimensions 200 x120 x75 mm Silo & Weighing industry Test & Measurement Industrial Processing *The DSJ4 does not include the required DSC cards. Please refer to the DSC product Sheet for available options.

Related Product Card version available the strain gauge data converter to RS232. Evaluations kits for DCell and DSC are available for stress free set up.Strain gauge data converter to RS232. Strain gauge data converter to 4 channel digital load cell converter CAN RS485 Modbus, or IP65 cased version Case Study To succeed in racing, yachts have to achieve maximum performance and the forces acting upon a yacht's mast can give an indication on how efficient the sail is performing. A carbon fibre free-standing yacht mast had four sets of strain gauges fitted fore, aft, port 6 starboard. Four digial...