• Type: SCFb-MH16-V-PA-01-4S
• Material: PA (Polyamide)
• In/Out Connection: 4x20 "
• Continuous Flow: No
• Micron Ratings: 50, 80, 125, 200, 300, 500, 800
• Efficiency: 90%
• Efficiency on Non-Compressible Particles: High
• Efficiency on Compressible Particles: Good
• Efficiency on Light Particles: Good

• Minimum Working Pressure: 1 bar
• Maximum Working Pressure: 6 bar
• Hydraulic Test Pressure: 9 bar
• Maximum Working Temperature: 50°C
• pH Range: 5 to 8
• Maximum Diameter of Inlet Particles: 3 mm
• Maximum Total Suspended Solids: 50 mg/l (50-80 Micron), 100 mg/l (125-800 Micron)
• Maximum Pressure Difference: 2 bar

• Electric Power: Not specified
• Electric Power Solenoid Valve: Not specified
• Air Pressure Min: Not specified
• Air Pressure Max: 0 bar

• Water and Sea Water Filtration
• Prefiltration for Water Treatment Plants
• Process Water
• Evaporative Cooling Towers
• Heat Exchangers
• Irrigation
• Aquaculture
• Protection of Spray Nozzles
• Prefiltration for Ultrafiltration (UF) and Reverse Osmosis (RO) Plants

• Filtering Surface: 0.8 m²
• Connection In/Out: 4x20 "
• Micron Options: 50, 80, 125, 200, 300, 500, 800
• Flow Rate: 108,000 l/h
• Cleaning Flow Rate at 2 bar: 108.00 m³/h
• Cleaning Time: 10 seconds
• Power Needed: 0 Watt

• Model: SCFbMH16V4S
• Material: PA (Polyamide)
• Connection IN/OUT: 4x20 "
• Micron Specs: 50, 80, 125, 200, 300, 500, 800

Note: The end caps and height's choice may lead to a product assembly differing from the figure shown. Flow rate charts are available on the specified website by selecting micron gradient and connections.