Pressure Reducing Valves DM 462
2Pages

Pressure Control Valves Pressure Reducing Valves DM 462 Page No. DM 462/2.1.123.1 - Standing 18.09.2012 MANKENBERG GmbH | Spenglerstraße 99 | D-23556 Lübeck www.mankenberg.de | Tel. +49 (0) 451 - 8 79 75 0 Valve for Hygiene Applications | Ultrapure Media Technical Data Connection DN Nominal Pressure PN Outlet Pressure Inlet Pressure Kvs-Value Temperature Medium 25 - 80 2.5 - 10 0.3 - 5 bar up to 8 bar 4 - 70 m3/h 180 °C liquids, gases and steam Description Medium-controlled pressure reducers are simple control valves offering accurate control while being easy to install and maintain. They control the pressure downstream of the valve without requiring pneumatic or electrical control elements. The DM 462 pressure reducing valve is a twin seat diaphragm-controlled spring-loaded proportional control valve which is primarily used for hygienic applications in the food processing and pharmaceutical industries. A PTFE protective foil renders the diaphragm physiologically safe and steamproof up to 180 °C. The valve does not require an external pilot line. This valve is manufactured from deep-drawn stainless steel featuring excellent corrosion resistance. It contains virtually no dead pockets and is suitable for use in CIP and SIP systems. The angled design allows complete draining. The spring module comprising spring cap, spring, adjusting screw, diaphragm and internal components, is connected to the valve body only by means of a clamp ring and two bolts. Changing the diaphragm or the complete spring assembly for a different control pressure range is extremely simple and does not call for special tools. The same applies to servicing and maintenance. The outlet pressure to be controlled is balanced across the diaphragm by the force of the valve spring (set pressure). As the outlet pressure rises above the pressure set using the adjusting screw, the valve cone moves towards the seat and the volume of medium is reduced. As the outlet pressure drops the valve control orifice increases; when the pipeline is depressurised the valve is open. Rotating the adjusting screw clockwise increases the outlet pressure. These valves are no shut-off elements ensuring a tight closing of the valve. In accordance with the VDI/VDE guideline 2174 a leakage rate of 0.5 percent of the constant volume flow is permitted for the valve in closed position.. Standard » » » » all stainless steel construction clamping flanges DIN 32676 non rising adjusting screw quick-release body clamp ring Options » polished version for food, pharmaceutical and superclean applications, surface roughness: Ra ≤ 0.25/ ≤ 0.4/ ≤ 0.8 µm » diaphragm protection by PTFE foil » pneumatic actuation » for toxic or hazardous media: sealed spring cap complete with leakage line connection (incl. sealed adjusting screw). Must be installed with a leakage line capable of draining leaking medium safely and without pressure » various diaphragm and seal materials suitable for your medium » special connections: Aseptic, ANSI or DIN flanges, welding spigots; other connections on request » special versions on request Operating instructions, know how and safety instructions must be observed. All the pressure has always been indicated as overpressure. We reserve the right to alter technical specifications without notice. Kvs-Values [m3/h] nominal diameter DN 25 40 4 22 50 22 65 60 Setting Ranges [bar] and Nominal Pressure PN nominal diameter DN 40 - 80 25 - 80 0.3 - 1.1 0.8 - 2.5 PN 10/2.5 PN 10/6 80 70 25 - 80 2-5 PN 10/10

Pressure Control Valves Pressure Reducing Valves DM 462 www.mankenberg.de | Tel. +49 (0) 451 - 8 79 75 0 Valve for Hygiene Applications | Ultrapure Media Materials Temperature Body, Spring Cap, Internals Valve Seal Spring Diaphragm Protection Foil for Diaphragm 130 °C SST 316L EPDM CrNi-steel EPDM Option Dimensions [mm] size nominal diameter DN (clamping flanges) 25 40 50 AE 100 115 125 C 205 230 230 D 138 200 200 Page No. DM 462/2.1.123.2 - Standing 18.09.2012 MANKENBERG GmbH | Spenglerstraße 99 | D-23556 Lübeck Weights [kg] nominal diameter DN (clamping flanges) 25 40 50 2.5 6.5 6.5...