Hook elevation diagram Main boom and lattice extension

Main boom

Main boom + swing-away extension Lattice extension length 26 ft Main boom length Lattice extension length 43 ft Main boom length Lattice extension length 26 ft Lattice extension length 43 ft

Main boom + swing-away extension Lattice extension length 26 ft Main boom length Lattice extension length 43 ft Main boom length Lattice extension length 26 ft Lattice extension length 43 ft

Main boom — free on wheels Load capacities above bold line are based on structural strength, and tipping must not be relied upon as a limitation of lifting capacity. Rated loads must not be exceeded. Notes for lifting capacities Rated loads do not exceed 85% of tipping load with the machine properly levelled on firm ground. 360° duties - on outriggers fully extended. Note counterweight required as listed in relevant lifting capacity'columns. For safe crane operation due allowance must be made to compensate for high winds, side load, pendulum action and other hazardous conditions. No side pull...

Weights/Working speeds Lifting capacity (Tons) Total weight Main hoist Auxiliary hoist Swing gear Boom elevation infinitely variable 0 — 460 ft/min. single line 0 — 460 ft/min. single line approx. 45 seconds to reach from -3° to + 84° boom angle Rope diameter/Rope length Max. single line pull approx. 100 seconds for boom length from 33-105 ft HKt\£ Telescopic boom f"^^4. outriggers Working range | ^ | Axle load Hook blocks and hook Crane motion \^^^ Speed H Swing-away lattice

Chassis: Special KRUPP 3-axle carrier, all-welded torsion-resistant box-type construction in high strength steel. Outriggers: 4 hydraulically telescoping beams with vertical cylinders and outrigger pads. Independent horizontal and vertical movement control on each side of the chassis. Levelling device. Engine: Mercedes-Benz OM 442 diesel, 8 cylinders, water-cooled, 221 kW (300 HPI at 2100 mirr' (DIN 6271 IFNI. Tank capacity: approx. 80 gal. Transmission: ZF 6-gear powershift 6 WG 200 with integrated transfer case, and front axle drive disconnect. Axle lines: 3 axle lines. Axle lines 1 and 3 are...