*mydirectindustry

Igo T 130

Product catalog summary

Specifications:
The Igo T 130 crane adheres to ASME B30.29 standards. It is designed for the North American market, utilizing 12 counterweight slabs. The crane's power control system operates at 480 V (+6% -10%) and 60 Hz, with power requirements ranging from 15 kVA to 35 kVA depending on operational conditions. The crane's mechanisms include various winch speeds and slewing capabilities, with a maximum load capacity of 17,637 lb.

Load Curves:
The document provides detailed load curves for different heights and radii, indicating the maximum load capacities at various configurations. For example, at a height of 164 ft, the load capacity ranges from 3,086 lb to 17,637 lb depending on the radius and configuration.

Mechanisms and Erection:
The crane features mechanisms for erection and operation, with specific speeds and power requirements. The erection process involves stages from 0 to 177 ft, with corresponding power and speed adjustments.

Transport and Dimensions:
The crane's transport dimensions are specified, with a total length of 56.3 ft and various component dimensions. The transport weight is distributed across different axles, with a total weight of 67,960 lb.

Operational Recommendations:
For optimal performance, it is recommended to consult the factory for specific dimensions and configurations. The document emphasizes the importance of adhering to the specified power and load limits to ensure safe operation.

Additional Information:
This document is a commercial overview and not legally binding. For detailed technical information, users are advised to refer to the corresponding technical instructions provided by The Manitowoc Company, Inc.

Catalog excerpts

19 ft F1 16.4 ft x 16.4 ft North American market utilizes 12 counterweight slabs, please consult factory for dimensions information. Power Control Anti-collision system Values have been rounded.

Open the catalog to page 1

Load curves

Open the catalog to page 2

NORTH AMERICAN HIGHWAY AXLE 8.2 ft Rear slewing radius Standard equipment Weight without load, without ballast, without transport axles, with max. jib and standard height Total ballast weight Required power Power Control Function: winch speeds adapted to the available power Hook heights given with plated pulley block This commercial document is not legally binding For any technical information, please refer to the corresponding instructions © 2021 The Manitowoc Company, Inc. www.manitowoc.com

Open the catalog to page 4

Igo T 130

Igo T 130

Catalog excerpts

All Manitowoc Cranes catalogs and technical brochures

Archived catalogs