North American Product Guide ASME B30.5 Imperial 85% Features • 400 t (450 USt) rating • 15,4 m - 60 m (51 ft - 197 ft) ve-section boom • 25 m - 79 m (82 ft - 259 ft) luffing jib • Self-rigging MegaWingLift™ • 135 t (297,600 lb) counterweight with hydraulic removal system • MegaDrive™ hybrid drive system • Self-rigging auxiliary hoist

Features MegaWingLift™ The new, patented self-rigging MegaWingLift™ reduces transportation and erection costs to a minimum. Both the MegaWingLift™ and the auxiliary hoist can be installed without an auxiliary crane. • Transport weight: < 11 t (24,000 lb) • Transport height: < 2500 mm (8.2 ft) The GMK6400 comes equipped with a turbocharged OM 502 LA with eight-cylinder and 405kW Tier 4i/Euromot IIIb water-cooled Mercedes-Benz diesel engine. The new carrier cab offers increased comfort and ergonomic instrumentation, an improved heating and cooling system with air conditioning as standard, full...

Load chart overview ] 5 Main boom (working range/load charts) 20 Main boom and MegaWingLift™ 3Q (working range/load charts) Main boom and lattice extension 37 (working range/load charts) Main boom, lattice extension and MegaWing Lift™ 44 (working range/load charts) Main boom and luffing jib 5] (working range/load charts) Main boom, luffing jib and MegaWing Lift™ gg (working range/load charts) Main boom and heavy duty jib gg (working range/load charts) Main boom,heavy dutyjib and MegaWingLift™ g] (working range/load charts)

Specifications Superstructure 135 t (297,600 lb) consisting of various sections with hydraulic installation/removal system controlled from the superstructure cab. Vehicle width 3,0 m (9.8 ft). 15,4 m - 60,0 m (51 ft - 197 ft) 5-section, full power MEGAFORM™ boom with TWIN-LOCK™ Pinning. Electrical system Boom nose Ten nylatron sheaves, mounted on heavy duty tapered roller bearings with removable pin-type rope guards. Quick reeve boom nose. Removable auxiliary boom nose with removable pin type rope guard. 2 batteries: 12V/170Ah Lighting system and signals 24V. Hydraulic motor 235 kW (315 hp) Rexroth....

Specifications Superstructure continued *Optional hookblocks Lifting capacity Possible load with the crane* Box type, torsion resistant frame is fabricated from high strength steel. Transmission ZF AS Tronic 12 Electronic automatic shifting. Kessler W2500 single stage transfer case. Outrigger system Four hydraulic two stage outrigger beams with vertical cylinders and outrigger pads, 700 mm (27.6 in) round. Outrigger can be set in 5 positions: 8,5 m (27.9 ft) * varies depending on national regulations # 0° over rear with additional equipment Independent horizontal and vertical movement controlled...

Specifications Carrier continued Axles 1st axle line – drive/steer 2nd axle line – drive/steer 3rd axle line – steer 4th axle line – drive/steer (disconnects >25 km/h [16 mph]) 5th axle line – drive/steer (disconnects >25 km/h [16 mph]) 6th axle line – steer Axles 1 and 2 with planetary hub reduction and center mounted gearing. Axles 4 and 5 MegaDrive™. Tires Two-man, composite designed aluminum and fiber reinforced plastic construction with the following features: safety glass, driver seat with pneumatic suspension, enginedependent hot water heater, power windows, heated rear view mirrors, complete...

Ra = Radius all wheels steered *Lowered THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Auxiliary hoist THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Dimensions Lattice extension Lattice extension dimensions THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Transport proposals PROVISIONAL- Boom over front 17 300 mm (56.8') Unit equipped with: Boom over front,rear outrigger box removed • 20.5 tires on aluminum rims Boom over front,rear outrigger box installed Boom removed, rear outrigger box installed • Operator, 75 kg (165 lb) Allow 3% variation in weight due to manufacturing tolerances PROVISIONAL - Boom removed, superstructure over rear PROVISIONAL - Trailing boom with dolly 25 124 mm (82.4') Boom in dolly over rear, rear outrigger box removed Boom in dolly over rear, rear outrigger box installed Axles 1-2 Boom removed, superstructure over rear...

Transport proposals Transport proposal A+B+C+D+H+L A+B+C+D+H+L F+E+I F+E+I THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.

Transport proposals Transport proposal F+E+G F+E+G 15 t (33,070 lb) baseplate 15 t (33,070 lb) baseplate + + 2x10 t t (20,046slab + auxiliary hoist hoist 2 x 10 (22,046 lb) lb) slab + auxiliary THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.