Manitowoc 8500-1 Product Guide ASME B30.5 Metric / Imperial Features • 80,0 t (85 USt) capacity • 61 m (200 ft) heavy-lift boom • Max boom + jib combination: 54,9 m (180 ft) + 18,3 m (60 ft) • 213 kW (285 HP) engine • 160 m/min (525 fpm) maximum line speed • 75,6 kN (17,000 lb) rated line pull

Energy saving systems Green-Engine mode conserves fuel during full speed drum operation under load, at a lower engine RPM. Other available options include Green-Winch Mode and Auto Idling Stop Mode. Self-erecting counterweight Eliminates the need for an assist crane, and also allows for reduced counterweight chart operation. Retractable crawlers Crawlers can be extended and retracted for better jobsite maneuverability. On some models, these crawlers can also ship attached for easier transport and quicker setup.

Winch performance data 12 Load chart notes 13 Heavy-lift boom range / charts 16 Fixed jib boom range / load charts 18 Manitowoc Crane Care 22

Specifications Upperworks Load hoist, boom hoist and propel. . 2 Piston pumps Swing . . . . . . . . . . . . . . . . . . . . . . . . 1 Piston pump Control system and auxiliary. . . . . . . . 2 Gear pumps Brake cooling system. . . . . . . . . . . . . 2 Gear pumps Reservoir capacity . . . . . . . 440 liter (116 US gallon) HINO J08E-UV, 6 cylinder, water-cooled diesel, direct fuel injection with turbocharger, 213 kW (285 HP) at 2100 high-idle RPM. Maximum torque 1017 N•m (750 lb•ft) net at 1,600 rpm; Interim Tier 4/ Stage IIIB (Required for sale in the US/Canada/ Europe; requires "Ultra Low Sulfur...

Boom support system Single drum powered by a hydraulic axial piston motor through a planetary reducer. Brake: A spring-set, hydraulically released multipledisc brake is mounted on the boom hoist motor. An external ratchet is fitted for locking the drum. Drum: Single drum, grooved for 16 mm diameter wire rope. Boom hoist reeving is 12-part line. Wire Rope Capacity: Drum 150 m (492 ft) working length. Line speed: Hoisting . . . . . . . . . . . . . . . . . 70m/min (230 ft/min) Lowering. . . . . . . . . . . . . . . . . 70m/min (230 ft/min) Gantry Crawler assemblies can be hydraulically extended for...

Specifications Tools and accessories A set of tools and accessories are furnished. Optional Equipment Optional: blocks and hooks each with roller bearing sheaves grooved for 22 mm diameter wire rope, and roller bearing swivel with hook latch. 7,7 t ball hook, 160 kg, wedge socket for 22 mm wire rope. (12 USt ball hook, 722 lb wedge socket for 22 mm wire rope.) 19 t hook block, 400 kg with one 500 mm Nominal O.D. roller bearing sheave. 32 t hook block, 500 kg with two 500 mm Nominal O.D. roller bearing sheaves. 60 USt hook block, 2,486 lb, with four 24” Nominal O.D. roller bearing sheaves. 80...

Outline dimensions (CRAWLER RETRACTED) (CRAWLER EXTENDED)

Outline dimensions Upperworks Length Width Height Weight Note: Weight includes base machine, crawler, gantry, maximum hoist and whip lines on drums, boom butt, full hydraulic fluid reservoir, and one third tank of fuel. Length Width Height Weight Length Width Height Weight Length Width Height Weight Note: Weight includes base machine, gantry, maximum hoist and whip lines on drums, full hydraulic fluid reservoir, and one third tank of fuel. Note: Weight includes base machine, gantry, maximum hoist and whip lines on drums, boom butt, full hydraulic fluid reservoir, and one third tank of fuel. Upperworks...

Outline dimensions

Outline dimensions Boom butt 5,8 m (19') Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Note: Use one "A" type insert with lug required for any boom combinations that require a 12,2 m (40 ') insert. Length Width Height Weight

Outline dimensions Fixed jib top Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight

Winch performance data Line pull Rated line pull kg (lb) *Maximum line pull Front drum Rear drum * Maximum line pull is not based on wire rope strength. Wire rope specifications Working length m (ft) Boom hoist drum Front drum Rear drum Front and rear winch Line speed m/min (ft/min) 1 Rated line pull Single line pull kg (lb) NOTE: Line speeds and line pull based on single line. Line pulls are not based on wire rope strength.

Load chart notes 1. Rated loads included in the charts are the maximum allowable freely suspended loads at a given boom length, boom angle and load radius, and have been determined for the machine standing level on firm supporting surface under ideal operating conditions.The user must limit or de-rate rated loads to allow for adverse conditions (such as soft or uneven ground, out-of-level conditions, wind side loads, pendulum action, jerking or sudden stopping of loads, inexperience of personnel, multiple machine lifts, and traveling with a load). 2. Capacities do not exceed 75% of minimum tipping...

Boom combinations No. 8500-1 heavy-lift boom combinations Boom inserts Boom length m (ft) * NOTE: One 40 ft (12,20 m) boom insert with lug 40A is required for fixed jib. When no jib is installed a 40 ft (12,20 m) boom can be used instead of 40A. 12,2 m (40 ft) boom insert Model 8500-1 main boom 61,0 m (200 ft) 3,0 m (10 ft) boom insert 3,0 m (10 ft) boom insert 5,8 m (19 ft) boom butt Model 8500-1 Main boom 61,0 m (200 ft)

Boom combinations No. 8500-1 fixed jib combinations Fixed jib inserts Fixed jib length m (ft) 12,2 m (40 ft) boom insert Model 8500-1 main boom 54,9 m (180 ft) 3,0 m (10 ft) boom insert 3,0 m (10 ft) boom insert 5,8 m (19 ft) boom butt Model 8500-1 Fixed jib on main boom 73,2 m (240 ft)

Heavy-lift boom range diagram No. 8500-1 main boom Height above ground m (ft) Distance from centerline of rotation m (ft)

Heavy-lift boom load charts Model 8500-1 liftcrane boom capacities - 8500-1 main boom 26 120 kg (57,584 lb) crane counterweight 6 500 kg (14,330 lb) carbody counterweight crawler extended 360° Rating Boom m (ft) Meets ANDI B30.5 requirements – Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. For complete chart, refer to www.cranelibrary.com. Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for...