11000-1
24Pages

Catalog excerpts

Manitowoc 11000-1 Product Guide ASME B30.5 Metric / Imperial Features • 100 t (110 USt) capacity • 61,0 m (200 ft) heavy-lift boom • Max boom + jib combination: 57,9 m (190 ft) + 18,3 m (60 ft) • 213 kW (285 HP) engine • 163 m/min (535 fpm) maximum line speed • 113 kN (25,200 lb) rated line pull

Open the catalog to page 1

Energy saving systems Green-Engine mode conserves fuel during full speed drum operation under load, at a lower engine RPM. Other available options include Green-Winch Mode and Auto Idling Stop Mode. Self-erecting counterweight Eliminates the need for an assist crane, and also allows for reduced counterweight chart operation. Retractable crawlers Crawlers can be extended and retracted for better jobsite maneuverability. On some models, these crawlers can also ship attached for easier transport and quicker setup.

Open the catalog to page 2

Winch performance data 13 Load chart notes Heavy-lift boom range / charts 16 Fixed jib boom range / load charts 18 Manitowoc Crane Care 22

Open the catalog to page 3

Specifications Upperworks Engine HINO J08E-UV, 6 cylinder, water-cooled diesel, direct fuel injection with turbocharger, 213 kW (285 HP) at 2100 high-idle RPM. Maximum torque 1017 N•m (750 lb•ft) net at 1,600 rpm; Interim Tier 4/ Stage IIIB (Required for sale in the US/Canada/ Europe; requires "Ultra Low Sulfur Diesel") HINO J08E-VM, 6 cylinder, water-cooled diesel, direct fuel injection with turbocharger, 213 kW (285 HP) at 2100 high-idle RPM. Maximum torque 1017 N•m (750 lb•ft) net at 1,600 rpm; Tier 3 (Required for sale outside the US/Canada/Europe) One diesel fuel tank, 400 liters (105...

Open the catalog to page 4

Specifications Line speed: Single line on first drum layer. Hoisting . . . . . . . . . . . . . . . . . 70m/min (230 ft/min) Lowering. . . . . . . . . . . . . . . . . 70m/min (230 ft/min) Gantry This high folding type gantry is fitted with a sheave frame for boom hoist reeving. It provides full up, full down positions. Counterweight width. The track rollers are sealed for maintenance-free operation. Crawler brakes: multiple disk type, spring set hydraulically released parking brakes are built into each propel drive. Crawler shoes 914 mm (36") wide crawler. Travel speed (High/Low) 1.73/1.2...

Open the catalog to page 5

11.3 t swivel hook and weight ball, 460 kg (15 USt all hook, 1,310 lb wedge socket for 26 b mm wire rope.) 35 t hook block, 700 kg with one 617 mm Nominal O.D. roller bearing sheave. (40 USt hook block, 2,311 lb with three 24" Nominal O.D. roller bearing sheaves.) 70 t hook block, 900 kg, three 617 mm Nominal O.D. roller bearing bearing sheaves. (75 USt hook block, 3,820 lb, with four 24" Nominal O.D. roller bearing sheaves.) 90 t hook block, 1 300 kg, with four 617 mm Nominal O.D. roller bearing sheaves. (110 USt hook block, 2,946 lb with four 24" Nominal O.D. roller bearing sheaves.)...

Open the catalog to page 6

Outline dimensions (CRAWLER RETRACTED) (CRAWLER EXTENDED)

Open the catalog to page 8

Outline dimensions Note: Weight includes base machine, crawler, gantry, maximum hoist and whip lines on drums, boom butt, full hydraulic fluid reservoir, and one third tank of fuel. Note: Weight includes base machine, crawler, gantry, maximum hoist and whip lines on drums, full hydraulic fluid reservoir, and one third tank of fuel. Note: Weight includes base machine, crawler, gantry maximum hoist and whip lines on drums without self-removal unit, full hydraulic fluid reservoir, and one third tank of fuel. Upperworks without crawlers xl Note: Weight includes base machine, gantry maximum...

Open the catalog to page 9

Outline dimensions Crawlers Length Width Height Weight Upper counterweight Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Carbody counterweight

Open the catalog to page 10

Self removal unit Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Note: Use one "A" type insert with lug required for any boom combinations that require a 12,2 m (40 ') insert.

Open the catalog to page 11

Outline dimensions Fixed jib butt Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight Length Width Height Weight

Open the catalog to page 12

Winch performance data Line pull Rated line pull kg (lb) *Maximum line pull Front drum Rear drum * Maximum line pull is not based on wire rope strength. Wire rope specifications Working length m (ft) Boom hoist drum Front drum Rear drum Front and rear winch Line speed m/min (ft/min) 1 Rated line pull Single line pull kg (lb) NOTE: Line speeds and line pull based on single line. Line pulls are not based on wire rope strength.

Open the catalog to page 13

Load chart notes 1. Rated loads included in the charts are the maximum allowable freely suspended loads at a given boom length, boom angle and load radius, and have been determined for the machine standing level on firm supporting surface under ideal operating conditions.The user must limit or de-rate rated loads to allow for adverse conditions (such as soft or uneven ground, out-of-level conditions, wind side loads, pendulum action, jerking or sudden stopping of loads, inexperience of personnel, multiple machine lifts, and traveling with a load). 2. Capacities do not exceed 75% of minimum...

Open the catalog to page 14

Boom combinations No. 11000-1 heavy-lift boom combinations No. 11000-1 fixed jib combinations Fixed jib inserts Boom inserts Boom length m (ft) 12,2 m (40 ft) boom insert 12,2 m (40 ft) boom insert * NOTE: One 40 ft (12,20 m) boom insert with lug 40A is required for fixed jib. When no jib is installed a 40 ft (12,20 m) boom can be used instead of 40A. 12,2 m (40 ft) boom insert 12,2 m (40 ft) boom insert Model 11000-1 main boom 57,9 m (190 ft) Model 11000-1 main boom 61,0 m (200 ft) 12,2 m (40 ft) boom insert 12,2 m (40 ft) boom insert 3,0 m (10 ft) boom insert 3,0 m (10 ft) boom insert 5,8...

Open the catalog to page 15

Heavy-lift boom range diagram No. 11000-1 main boom Height above ground m (ft) Distance from centerline of rotation m (ft)

Open the catalog to page 16

Heavy-lift boom load charts Model 11000-1 liftcrane boom capacities – 11000-1 main boom 31,3 t (69,000 lb) upper counterweight + 14,4 t (31,750 lb) carbody counterweight 360° Rating Boom m (ft) *Rated loads based on factors other than machine stability such as structural competence. Meets ASME B30.5 Requirements – Capacities do not exceet 75% of static tipping load. NOTICE: This capacity chart is for reference only and must not be used for lifting purposes. For complete chart, refer to www.cranelibrary.com. Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load....

Open the catalog to page 17