MLT 737-130 PS+ 2021

1 / 4 PagesView full catalog

MLT 737-130 PS+ 2021

Product catalog summary

Technical Specifications:

Capacities: Max capacity of 8157 lbs, max lifting height of 22 ft 8 in, and max outreach of 12 ft 10 in.
Weight and Dimensions: Unladen weight is 16865 lbs, ground clearance of 1 ft 4 in, and overall length to carriage is 16 ft 4 in.
Performance: Lifting time is 6.8 seconds, lowering time is 7.1 seconds, and max travel speed is 24.8 mph.
Engine: Deutz engine, Stage V norm, with 129 Hp and max torque of 500 Nm at 1600 rpm.
Transmission: Torque Converter with powershift, 6 forward and 3 reverse gears.
Hydraulics: Load sensing pump with a flow of 150 l/min and pressure of 18 PSI.
Tank Capacities: Hydraulic oil capacity of 35.66 US gal and fuel tank capacity of 31.70 US gal.
Noise and Vibration: Noise at driving position is 72 dB(A), environmental noise is 105 dB(A).

Additional Information:

Tractor homologation and safety cab homologation (ROPS - FOPS level 2).
Standard tyres are Alliance - A580 - 460/70 R24 159A8.
Contact information for Manitou's headquarters in France is provided.

Disclaimer: The brochure describes various configurations and options, and specifications may change without notice. For more details, contact a Manitou dealer.

Catalog excerpts

Technical sheet : ^MANITVUHANDLING YOUR WORLD

Open the catalog to page 1

Imperial Max. capacity Max. lifting height Max. outreach Reach at max. height Breakout force with bucket Weight and dimensions Unladen weight (with forks) Ground clearance Wheelbase Overall length to carriage (with hitch) Front overhang Overall width Overall cab width Overall height Tilt-down angle Tilt-up angle External turning radius (over tyres) Standard tyres Drive wheels (front / rear) Steering wheels (front / rear) Performances Lifting Lowering Extension Retraction C rowd Dump Engine Engine brand Engine norm Engine model Number of cylinders - Capacity of cylinders I.C. Engine power rating...

Open the catalog to page 2

Dimensional drawing Load chart Rough terrain load chart (EN 1459 B) Imperial

Open the catalog to page 3

This brochure describes versions and conﬁguration options for Manitou products which may be ﬁtted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the speciﬁcations shown and described at any time and without prior warning. The manufacturer is not liable for the speciﬁcations given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of speciﬁcations is not comprehensive. The logos and visual...

Open the catalog to page 4