Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Manitex
  3. 3577 C/T

3577 C/T

3577 C/T
1 / 8 PagesView full catalog

3577 C/T

Product catalog summary
Overview: The document outlines the specifications and operational guidelines for the Manitex CM350 Series Telescopic Crane, focusing on features, chassis specifications, load charts, and technical descriptions.
Crane Features: The CM350 series balances features, cost, and usability. Notable features include a Greer Insight™ load moment indicator, self-lubricating boom slider pads, and a compact design. It has a 35-ton capacity at a 6 ft. radius, with options for fixed and telescopic jibs.
Chassis Specifications: Specifications for the 35100C and 35124C chassis are detailed, highlighting dimensions and weight distribution. The use of a front bumper stabilizer is crucial for 360º operation.
Outrigger and Stabilizer Information: The crane features out-and-down outriggers and stabilizers with hydraulic cylinders and pivoting pads, accompanied by audible alerts during motion.
Load Charts and Boom Diagrams: Load charts for the main boom and jib, along with boom diagrams, are provided to determine crane lifting capacities and operating procedures.
Technical Descriptions: The crane includes dual operating stations with ANSI B30.5 standard controls, a torsion-resistant sub-frame, and weather-resistant components. Options include various jibs, baskets, and operator aids.
Safety and Operational Guidelines: Emphasis is placed on following the operator’s manual and load charts to prevent injury or death. LMI operating codes and warnings about operating beyond specified areas are included.
Options and Accessories: Various options are available, including different jibs, baskets, and hydraulic components. Specifications for the hoist, rope, and hook systems are also listed.
Conclusion: The CM350 series is designed for versatility and profitability, enhancing safety, ease of use, and maintenance efficiency. It is suitable for highway travel and quick repairs at commercial truck centers.
Specifications: Detailed specifications for the CM350 Series, specifically the 35124C model, include a wheelbase of 271 inches, cab to tandem distance of 202 inches, and an after frame length of 114 inches. The nominal frame width is 34 inches, with a frame section modulus at 180/360º area of operation of 30 in.³ and a stress of 125,000 psi. Minimum truck axle weights are specified for both front and rear, with gross weight ratings provided.
Procedures and Recommendations: The document notes the minimum chassis weight required for 85% stability, potential need for additional axles for federal bridge legal configuration, and recommends a front stabilizer for certain installations. It emphasizes adherence to machine-specific load charts and information.
Load Capacities: Load charts detail lifting capacities at various boom angles and extensions, such as a 70,000 lbs capacity at a 6-degree boom angle. Detailed capacities for different boom lengths and angles are provided for both main boom and jib configurations.
Outrigger and Stabilizer Information: Information on outrigger-stabilizer combinations is provided, with options for intermediate and fully extended configurations. All loads are rated at a 360º pick, with structural and tipping ratings specified.
Notes: All data is intended as a guide, and crane operation should be based on specific load charts and information. Deductions from main boom capacities for stowed jib configurations are included, with specific weight deductions for both fixed and telescopic jibs.
See more

Catalog excerpts

3577 C/T-1

UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.Manitex.com

 Open the catalog to page 1
3577 C/T-2

CM350 SERIES TELESCOPIC CRANE TECHNICAL DESCRIPTIONS Control System Dual operating stations are equipped with four single-lever crane controls arranged in accordance with ANSI B30.5 standards. Each station includes: Fully proportional control valves • Individual control levers for each outrigger and stabilizer • Beverage holder 35100C: • Max. tip height with extension: 166 ft. 8 in. • Max. tip height with extension retracted: 142 ft. 1 in. 35124C: Hermetically sealed enclosure includes power in relays and circuit status LEDs Mounting System Pedestal sub-frame and stabilizers are mounted to chassis...

 Open the catalog to page 2
3577 C/T-3

CM350 SERIES TELESCOPIC CRANE TECHNICAL DESCRIPTIONS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / - Hoist, Rope and Hook Maximum theoretical line-speed: 453 fpm (138 mpm) 2 upper & 3 lower quick reeve boom point Self lubricating slider pads Maximum theoretical bottom-layer line pull: 14,500 lbs. ( 6,577 kg) 35100C: • Boom max. tip height 111 ft. 4 in. (33.9 m) • Boom min. tip height 100 ft. (30.5 m) Main winch cable diameter: 5/8 in. (16 mm) rotation resistant 35124C: • Boom max. tip height: 134 ft. 8 in. (40.8 m) • Boom min. tip...

 Open the catalog to page 3
3577 C/T-4

CM350 SERIES TELESCOPIC CRANE THE CM350 SERIES TELESCOPIC CRANE The CM350 series strikes the perfect balance between the three things customers tell us they care about most: features, cost and ease of use. • A Greer Insight™ load moment indicator, the industry's only monitoring display that offers the feature-rich capabilities and high-resolution VGA graphics to help operators work safer and smarter • Self-lubricating boom slider pads, to minimize maintenance costs • A compact size; properly equipped, the unit is just 43 ft. long Other features include: • Optional fixed & telescopic jib • Out-and-down...

 Open the catalog to page 4
3577 C/T-5

CM350 SERIES TELESCOPIC CRANE WORK AREA FRONT BUMPER Deductions from rated loads for load handling devices supplied by Manitex Auxiliary block Auxiliary sheave Overhaul ball Load blocks Hose reel WARNING: Lifting off the main boom point while the jib is erected is not intended nor approved. See overhaul ball mfgr. nameplate See block mfgr. nameplate REEVING DIAGRAM ALLOWABLE LINE PULL CONDITION BEFORE OPERATING CRANE. OWNER'S MANUAL CRANE WEIGHT TRUCK AXLE WEIGHT ** Minimum chassis weight is required to meet 85% stability requirements. Chassis data is general - not for engineering. Some dimensions...

 Open the catalog to page 5
3577 C/T-6

CM350 SERIES TELESCOPIC CRANE CRANE WEIGHTS Total crane (standard): 22’ Flatbed Weight TRUCK AXLE WEIGHT 32,260 lbs. Minimum truck axle weight - Front** Minimum truck axle weight - Rear** Front Axle Gross Weight Rating Rear Axle Gross Weight Rating CHASSIS DATA ** Minimum chassis weight is required to meet 85% stability requirements. Chassis data is general - not for engineering. Some dimensions depend on truck selection. Notes: Additional axles required for federal bridge legal configuration - consult Manitex. Manitex highly recommends addition of a front stabilizer and may be required on some...

 Open the catalog to page 6
3577 C/T-7

CM350 SERIES TELESCOPIC CRANE 35124C LOAD CHART: Main Boom and Jib / / / / / / / / / / / / / / / / / / / / / / / / / / / / Lifting Capacities 5-section Boom 31 ft. - 124 ft. Jib 26 ft. - 46 ft. Loaded Boom Angle (deg) Loaded Boom Angle (deg) Loaded Boom Angle (deg) Outrigger-Stabilizer Combination Fully Extended (optional) Loaded Boom Angle (deg) Outrigger-Stabilizer Combination Intermediate Extended - Imperial & Metric Units IB LOAD CAPACITIES LMI CODE 2 MAIN BOOM LMI CODE 1 Loaded Boom Angle (deg) OUTRIGGER EXTENSION / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /...

 Open the catalog to page 7
3577 C/T-8

CM350 SERIES TELESCOPIC CRANE 35100C LOAD CHART: Main Boom / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Lifting Capacities 4-section Boom 30.5 ft. - 100 ft. MAIN BOOM LMI CODE 1 30.5 ft. Loaded Boom Angle (deg) Loaded Boom Angle (deg) Loaded Boom Angle (deg) Loaded Boom Angle (deg) Loaded Boom Angle (deg) Load Capacity (lbs.) Code 2 Loaded Boom Angle (deg) Load Capacity (lbs.) Code 3 Loaded Boom Angle (deg) Loaded Boom Angle (deg) Load Capacity (lbs.) Code 4 110 DEDUCTIONS FROM MAIN BOOM CAPACITIES FOR STOWED JIB - FJ = Fixed Jib TJ = Telescopic Jib...

 Open the catalog to page 8

All Manitex catalogs and technical brochures

  1. TC700
    TC700

    16  Pages

  2. 3051 T
    3051 T

    16  Pages

  3. 1970 C
    1970 C

    12  Pages

  4. 1770 C
    1770 C

    12  Pages

Archived catalogs

  1. C Series Features
    C Series Features

    2  Pages

  2. SC Product Guide
    SC Product Guide

    10  Pages

  3. S Series Features
    S Series Features

    2  Pages

  4. WL Series Features
    WL Series Features

    2  Pages

  5. SX Product Guide
    SX Product Guide

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.