Effective Date: September 1, 2013 This document is non-contractual. This document is supplied for reference use only. We are constantly making improvements to our products and reserve the right that specification, equipment, and prices are all subject to change without notice or obligation. The photographs, and /or images in this document are for illustrative purposes only and may include optional equipment and accessories and may not include all standard equipment. Refer to the appropriate Operator’s Manual and Load Charts for instructions on the proper use of this equipment to determine allowable...

Hook block Distance from hook to head sheave pin Hoist speed Boom elevation angle 1 - Main hoist 2 - Auxiliary winch 3 - Recovery winch Max. boom length with extension Rope length Boom with extension retracted Rope - standard/optional Boom angle Rope diameter Telescoping mode Permissible line pull Working radius Maximum line pull Boom length Slewing / Allowable slewing range Hydraulic actuated boom Slewing gears Full power mechanical synchronized Slewing brake Boom head / Hook block dimension Outriggers / Lifting on outriggers Main boom with auxiliary head Counterweight Radio remote control

Other features include: Maximize Rental Use and Value The CM190 telescopic crane strikes the perfect balance between the three things customers tell us they care about most in a rental crane: features, cost and ease of use. It’s one of the highest-capacity cranes available on a 4x2 chassis, yet it’s competitively priced and packed with standard features designed to save time and money. • Change line speed on the fly and minimize rope stacking with its 2-speed planetary hoist with grooved drum and negative draft flange. • Minimize maintenance costs with replaceable, self-lubricating boom slider...

BOOM DIAGRAM Imperial & Metric Units HEIGHT ABOVE GROUND 130 ft. (39,6 m) Extended Jib 40.6 ft. (12,4 m) OPERATING RADIUS FROM CENTERLINE OF ROTATION Data published herein is intended as a guide only. Crane operations is subject to machine specific load charts and information.

LOAD CHART: Main Boom and Jib / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Lifting Capacities 3-section Boom 26.5 ft. - 70 ft. Jib 23.6 ft. - 40.6 ft. Jib Load Ratings in (lbs.) with Outriggers and Stabilizers Extended Fixed Jib LMI Code #2 Jib Length for All Boom Lengths Jib Length for All Boom Lengths LMI Code #4 Jib Length for All Boom Lengths Telescopic Jib LMI Code #3 Loaded Boom Angle Boom Length & Marker Loaded Boom Angle Loaded Boom Angle Loaded Boom Angle Load Ratings in (lbs.) with Outriggers and Stabilizers Extended Deductions for stowed fixed...

Code Crane Configuration Outrigger Configuration Area of Operation #1 Main Boom Fully Extended #2 Fixed Jib Fully Extended #3 Telescopic Jib - Retracted Fully Extended #4 Telescopic Jib - Extended Fully Extended #5 Personnel lifting platform on main boom Fully Extended #6 Personnel lifting platform on fixed jib Fully Extended #7 Personnel lifting platform on tele, jib - retracted Fully Extended WARNING: Lifting personnel from extended jib is not approved. REEVING DIAGRAM Data published herein is intended as a guide only. Crane operations is subject to machine specific load charts and information...

CRANE DIMENSIONS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Imperial & Metric Units CHASSIS DATA Wheelbase (WB): 242 in. (6,147 mm) Cab to axle (CA): 168 in. (4,267 mm) After frame (AF): 100 in. (2,540 mm) Frame section modulus at 180º/360º rotation (min.): 15.9 in.3 - 110,000 psi (758,422 kPa) Minimum truck axle weight - front* 6,000 lbs. (2,722 kg) Minimum truck axle weight - rear* 4,000 lbs. (1,814 kg) Nominal frame W: 34 - 35 in. (864 - 889 mm) Front axle gross weight rating: 12,000 lbs. (5,443 kg)...

OUTRIGGER EXTENSION / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Imperial & Metric Units AREA OF OPERATION Line through centerline of rotation 180º standard work area Optional work area with Front Bumper Stabilizer (FBS) Deductions from rated loads for load handling devices supplied by Manitex Optional Front Bumper Stabilizer (FBS) Overhaul ball Load blocks Hose reel Swing-around jib WARNING: Lifting off the main boom point while the jib is erected is not intended or approved. See overhaul ball mfgr. nameplate See...

TECHNICAL DESCRIPTIONS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Hoist, Rope and Hook Boom Boom length: 3-section 70 ft. (21,3 m) proportional boom Maximum theoretical line speed: 300 fpm (91 mpm) 3-sheave quick reeve boom point Maximum theoretical bottom-layer line pull: 11,500 lbs. (5,216 kg) Boom max. tip height: 80.8 ft. (24,6 m) Boom min. tip height: 37.7 ft. (11,5 m) Main winch cable diameter: 9/16 in. (14,3 mm) 6 x 25 EIPS IWRC Boom angle (min/max): -10º / 80º Line length: 300 ft. (91,4 m) Oversized diameter ball bearing...

TECHNICAL DESCRIPTIONS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Control System Dual operating stations are equipped with four single-lever crane controls arranged in accordance with ANSI B30.5 standards. Fully proportional control valves Each station includes: • Individual control levers for each outrigger and stabilizer Max. boom tip height with extension: 121.2 ft. (36,9 m) from ground • Engine start and stop Max. boom tip height with extension retracted: 104.5 ft. (31,9 m) from ground • Electronic foot throttle • Signal horn...

UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.Manitex.com