Fiberglass Duct Tools
10Pages

Duct Tools • Original Tie Tensioning Tools • FasGroov Kits • Hole Cutter • Squares and Knives

Master the Art of Fiberglass Duct Fabrication 77

FLEXIBLE DUCT NYLON TIE TOOLS Non-Slip Manual Tie Tensioning Tools These rugged lever action cut-off tensioning tie tools feature a unique notched gripper. TY4 A clean black baked on enamel wrinkle finish will also weather the elements and stand up to abuse on-the-job. Comfortable handles reduce the pinch point area, and gray vinyl cushion grips are available on the model TY4G. Works on all ties including thin designs. Cutter Handles Use Malco adjustable nylon ties to install flexible duct to take-offs, or secure bundles, up to 15 in. (3.81 cm) diameter. Made of 100% nylon, Malco ties offer...

NYLON TIES Work. Perform. Outlast UL Listed and Made in the U.S.A. Extra Heavy-Duty and UV Resistant Nylon Ties. Malco is one of the first to offer TYPE 21S Tie! Made of 100% Nylon, these one-piece, self-locking ties are easy to install. Just wrap tie around material, slip tail through head, tighten and set with a Malco Tie Tensioning Tool. Actual Size UV RESIS 11 & 24 inch (UL Type 21S -11 inch, TY11 for HVAC Mini-Splits) and TY24 24 inch ties for securing / bundling automotive, marine, industrial cable, hose, and wire. Actual Size Thickness 3/64 in. (1.32 mm) 3/32 in. (2.29 mm) Color...

FASGROOV® TOOLS Duct Board Fabrication Complete Solutions for Fiberglass Duct Lay out ductboard as you cut with a FasGroov® Kit. Available in kits and single tools for professional fabrication of all brands of 1 in. (25.4 mm) or 1-1/2 in. (38.1 mm) duct board. FasGroov Knives Safer to use with comfortable molded handles. Male and Female Shiplap Knives for 1 in. (25.4 mm) and 1-1/2 in. (38.1 mm) ductboard can be used on closed duct sections. Duct Knife features a rounded scoring edge to cut fiberglass without tearing skin. Plus, Malco’s FG1 Hole Cutter and a special 1-1/2 in. (38.1 mm) blade...

FASGROOV® DUCT BOARD KITS Work. Perform. Outlast. Duct Board FabricationComplete KitsSILVER FasGroov® Kits for 1 in. (25.4 mm) Duct Board FGSLK Shiplap Kit Silver Hand Tools with Square and Knives. FGVK Vee Kit Silver Hand Tools with Square and Knives. Includes: FGV1, FGV24, FGV3, FGV5, FGS Square plus FGK, FGM, and FGF Knives and #6 Tool FGV6 in Tool Case. Order FGSLKW for Shiplap Kit without Square. Includes: FGV1, FGV, FGV5, FGS Square plus FGK, FGM, and FGF Knives and #6 Tool FGV6 in Tool Case. FGSLKL Shiplap Kit Gold Hand Tools with Square and Knives. FGVKL Vee Kit Gold Hand Tools with...

FASGROOV® DUCT BOARD KITS Duct Board Fabrication Silver Tools FGSLK Gold Tools FGSLKL Shiplap Kit for 1-1/2 in. (38.1 mm) Duct Board Shiplap Kit for 1 in. (25.4 mm) Duct Board Includes: FGS Square and tools listed above plus FGK, FGM, and FGF Knives and #6 Tool FGV6 in Tool Case. Order FGSLKW without square. Includes: FGS Square and tools listed above plus FGK, FGML, and FGFL Knives in Tool Case. Order FGSLKLW for Shiplap Kit without square. Silver Tools FGVK Gold Tools FGVKL Label Color Label Color Label Color Label Color Gold Tools Silver Tools Gold Tools Includes: FGS Square and tools...

FLEXIBLE DUCT TOOLS Flex Duct Support Flexible duct is often susceptible to kinks and sags that restrict air flow. The FDS1 Flexible Duct Support eliminates air flow restrictions and increases efficiency to dramatically reduce utility bills and improve heated or air-conditioned room comfort. A properly supported 90° duct elbow typically improves air flow efficiency 10 to 40%. A Malco Duct Support quickly installs on new or existing flexible duct. The versatile FDS1 design uses either 36 or 48 inch nylon cable / zip ties to accommodate 4 inch to 16 inch diameters of flexible fiberglass wool...

Cuts insulated flexible round duct and also cuts the duct liner’s wire rib coil. Pointed bottom blade easily pierces duct to start cut. Heavy duty wire cutter is located away from scissor blades. Thumb operated latch ensures that sharpened blade edges stay closed when not in use. Multi-Purpose Shear Trim flex duct and tighten nylon ties with one tool! Thumb operated latch FDSH Universal Flex Duct Knife Sheath • 2-3/4 in. (70 mm) wide belt loop • Velcro safety strap • Easily fits DK6S Malco duct knife and duct tools FDC1, FDC2 and FDC3 Wire cutter to trim excess tie strap High density...

FLEXIBLE DUCT TOOLS Duct Knife for Fiberglass Duct Board Serrated edge aids cutting “flex” fiberglass wool duct. Hole Cutter for Fiberglass Duct Board DK6S Ergonomic cushioned handle offers comfortable, sure grip. Makes precise holes in duct board for flex duct take-offs. Supplied with standard double point utility knife blade for cutting 1 inch (25.4 mm) board. Use KBHC blade for 1-1/2 in. (38.1 mm) duct board. Cuts 4 to 20 in. (102 to 508 mm) diameter holes in fiberglass duct board. Operation is fast and easy. Cutter rotates counter clockwise on a center pivot punch. Durable extruded...