• Guillotines • Nibblers • Gauges • Punches • Hole Saws • Fiber Cement Saw Blades

Step by Step Solutions for Fiber Cement and Backer Board Siding 95

FIBER CEMENT SIDING GUILLOTINE Cut multiple angles in fiber cement siding with guillotine precision and minimal dust! Quickly and cleanly produce 3/12, 4/12, 6/12, 8/12, 10/12, or 12/12 pitch cuts and most other angles in fiber cement siding. Scribe desired angle on fiber cement siding plank and feed it into the guillotine blade as you cut. Long-life nickel plated blade design with high leverage handle requires less force to produce clean cuts and minimal air-borne dust. Stable welded frame will survive the most rugged job-site environments. Large guillotine work plate and open throat allows...

FIBER CEMENT SIDING GAUGES Overlap Gauges • Allows one-person installation of siding planks. • Two gauges support entire length of plank and precisely gauge a standard 1-1/4 in. (31.2 mm) overlap - even on a bowed wall. • No adjustments to vary and nothing to mark. • Works on 5/16 in. (7.9 mm) fiber cement siding plank. • Will not mar finish of pre-painted siding. Precision-ground tip assures gauge will grip behind siding plank. Strong, one-piece tempered spring steel construction. Depress thumb tab to allow plank to snap flush to wall and gauge. Place pair of gauges on top edge of lower plank...

FIBER CEMENT SIDING TOOLS Fiber Cement Siding Guillotine Shear Cleanly cuts 5/16 in. (8 mm) fiber cement siding without distortion or compression. A large, stable support plate, with board stop, ensures straight, square cuts in 8-1/4 in. (210 mm) wide plank with minimal dust. No sharpening required! The durable, lightweight steel frame and high leverage design offer long service life, easy handling and smooth cutting operation. Fast, Straight Trim Cuts Fiber cement contains crystalline silica. Respirable silica contained in cutting dust is known to cause cancer. Minimal Dust Operation Fiber Cement...

FIBER CEMENT SIDING TOOLS Hidden Nail Cutter The easiest way to cut hidden nails Cuts hidden nails left over from removal of damaged or unwanted fiber cement siding plank without damaging overlapping plank. Flat head with beveled leading edge easily maneuvers under edge of siding and into corners. Ideal for remodeling or salvaging projects. • Saves time and effort when replacing or salvaging siding, thin building materials, and windows. • Flat head with beveled edges easily maneuvers under edge of material and reaches into corners to cut hidden nails without damaging material. • Precision-ground,...

QUICK ACTION™ FIBER CEMENT SIDING HOLE SAWS Carbide Tipped Hole Saws and Accessories Easily cut thick or layered building materials including wood, wall tile, fiberglass, plastic and fiber cement siding including James Hardie® • Quick Change Pilot Drills are available in both Carbide Tipped and High Speed Steel. • Unlgue Quick Connect Arbor easily attaches both pilot drill and hole saw guickly and securely. • 19 separate hole saws work fast with carbide tipped teeth featuring self-cleaning deep gullets. • Cleanly cut holes in walls clad with fiber cement siding • Generous 2-1/4 in. (57 mm) saw...

METAL AND WOOD CUTTING HOLE SAWS Work. Perform. Outlast. H<>|e A hole saw supplied with a dedicated arbor is always the right match, properly assembled and ready to use. BiMetal by Malco concentric construction ensures vibration-free cuts in any machinable metal, including tool steels and stainless. The variable 4/6 pitched tooth configuration milled into a high speed steel edge and micro-welded to a shatterproof alloy steel body easily tackles nail embedded wood. The generous 1-15/16 inch (49.2 mm) cup depth allows cuts in wooden studs, joists and door slabs in one pass. H38 • Shatter Proof...