From Giorgio Cangini’s experience, a new Premium line for Earthmoving

ACCESSORI PLURY VIBRATION DRIVE 1.0 - 20.0 TONS VIBRATION DRIVE 6.0 - 40.0 TONS ACCESSORIES FOR VIBRATION DRIVES DOUBLE COMPACTOR PLATE FOR FRONT-MOUNTED MACHINES VIBRATORY ROLLERS FOR COMPACTION GRASS AND FORESTRY MULCHER STUMP GRINDER MULTIFUNCTION AUGER VIBRATORY SHEET PILE DRIVER

THE ONLY MULTIFUNCTIONAL SOLUTION FOR COMPACTION AND DRIVING POSTS AND SHEET PILES. ADVANCED VERSION REV 2

AVAILABLE FOR ALL OPERATING MACHINE TONNAGE RANGE VIBRATION POWER available with one or two eccentric shafts MULTIFUNCTION ACCESSORIES for compacting various types of ground and driving posts and sheet piles QUICK COUPLER for changing accessories quickly Flow control valve Stroke limiter Motor with HPS seal

The flow control valve operates by limiting and stabilizing the incoming oil flow, so the attachment receives only the amount required to work under the correct operating conditions. This means that the same attachment can be installed on multiple excavators, loaders, or operating machines, without being strictly dependent on the specific hydraulic flow rate of each machine. OPTIONAL PILE EXTRACTION KIT Recommended to protect the anti-vibration mounts during the extraction of piles, sheet piles, etc. The data provided should be considered indicative and should be compared with the capacity of...

■ vibrating mass ■directional force ■ vibrating mass ■ directional force Radial vibration, the centrifugal force producted is radially distributed over 360° Sinusoidal vibration, it vibrates vertically from top to bottom, concentrating the centrifugal force in the centre PLURY with bolted equipment PLURY with equipment attached via quick coupler The data provided should be considered indicative and should be compared with the capacity of the operating machine on which the equipment is used

COMPACTION accessories for PLURY 9 The data provided should be considered indicative and should be compared with the capacity of the operating machine on which the equipment is used VIBRO-DRIVING accessories for PLURY

OPTIONAL POST EXTRACTION KIT Recommended for use to protect the anti-vibration mounts. PLURY tONS 1124 *0

OPTIONAL POST EXTRACTION KIT Recommended for use to protect the anti-vibration mounts. PLURY TOW260621 0 ✓ The FLOW CONTROL VALVE limits and stabilizes the incoming oil flow, so the equipment receives only the amount required to operate under the correct conditions.

Model # A mm B mm C mm Kg. Model. PLURY TOK QUICK COUPLER B 530 100 240 29 W1 25 Model # A mm B mm C mm Kg. Model. PLURY TOK ADAPTER KIT B 230 170 200 13 W1 25 12 The data provided should be considered indicative and should be compared with the capacity of the operating machine on which the equipment is used

ADAPTER FOR QUICK COUPLING A ADAPTER FOR QUICK COUPLING B ADAPTER FOR QUICK COUPLING C ADAPTER FOR QUICK COUPLING D + E + F + G ADAPTER FOR QUICK COUPLING H + I + L Model. PLURY Model # Model. PLURY FIXED COUPLING MACHINE A W1 14 FIXED COUPLING MACHINE B W1 25 FIXED COUPLING MACHINE C W1 45 FIXED COUPLING MACHINE D + E + F + G W1 60 | W1 90 | W2 62 | W2 92 FIXED COUPLING MACHINE H + I + L W2 125 | W2 185 | W2 220 BOLTED PLATE MACHINE COUPLING BOLTED PLATE MACHINE COUPLING BOLTED PLATE MACHINE COUPLING BOLTED PLATE MACHINE COUPLING BOLTED PLATE MACHINE COUPLING Model # Model. PLURY Model. PLURY...

MECHANICAL SLEWING Model # A mm B mm C mm Kg. Model. PLURY Model # A mm B mm C mm Kg. Model. PLURY HYDRAULICS SLEWING Model # A mm B mm C mm Kg. Model. PLURY 5 Hoses €

The mechanical slewing ring can be mounted on the excavator arm with an oscillating configuration. Mechanical rotation allows the attachment to rotate on itself up to 210° in partial rotation. It allows the machine to rotate on itself 360° with continuous rotation. The rotor is supplied complete with hoses. The rotor can be mounted on the PLURY only with mechanically operated accessories. It cannot be used with hydraulically operated accessories. The hydraulic slewing ring can be mounted using the excavator coupling, allowing the attachment to rotate 360° on itself. 15 The data provided should...

Designed for vibrodriving and extracting wooden, concrete and steel posts. Suitable for landslide containment, embankments and riverbanks. Ideal for the construction of vineyards, orchards and fencing systems. VIBRATION POWER A fundamental combination, widely used in land maintenance and agriculture GRAPPLE with directly welded TOK ADAPTER MACHINE COUPLINGS the GRAPPLE can be mounted directly on the machine without drive. OPTIONAL POST EXTRACTION KIT Recommended for use to protect the anti-vibration mounts. The data provided should be considered indicative and should be compared with the capacity...

HYDRAULIC KITS HYDRAULIC KITS 2 HOSES GRAPPLE 2 HOSES GRAPPLE 2 HOSES GRAPPLE 2 HOSES GRAPPLE # Model. PLURY CABLE COIL Volt Model. PLURY The data provided should be considered indicative and should be compared with the capacity of the operating machine on which the equipment is used

KIT 1 KIT 2 Grapple accessory suitable for vibro-driving and extraction of concrete and steel poles. Pre-hole drill suitable for making a pre-hole in hard ground Suitable for vibro-driving concrete poles The data provided should be considered indicative and should be compared with the capacity of the operating machine on which the equipment is used

KIT 3 KIT 4 Shock-absorbing rubber accessory suitable for vibrating concrete poles, avoiding damage to the pole itself Toothed plate mounted in place of the bell for vibratory driving of wooden piles of different diameters Replacement rubber pad for centering bell The data provided should be considered indicative and should be compared with the capacity of the operating machine on which the equipment is used

H-BEAM CLAMP - H-BEAM VIBRO-DRIVING CLAMP Clamp designed for vibro-driving and extracting H-beams in various soil conditions. OPTIONAL FOR PILE EXTRACTION Recommended to protect the anti-vibration mounts. H-BEAM CLAMP with TOK adapter welded directly onto the clamp. H-BEAM CLAMP 20 GRIP D+E+F+G H+I+L Hydraulic Flow Model. PLURY 20 The data provided should be considered indicative and should be compared with the capacity of the operating machine on which the equipment is used