Combination Hammer HR3000C - 2 Pages

Add to MyDirectIndustry favorites
Combination Hammer  HR3000C

Catalog excerpts

• Cutter 130 175 50 100 A-11885 A-11900 A-11922 A-03648 A-03660 A-11944 A-03682 A-03707 A-03729 A-03741 A-03763 A-03785 A-03800 A-11966 A-11988 A-03822 A-03844 A-03866 A-03888 A-03903 A-03925 A-12005 A-12027 A-12049 A-03947 A-03969 A-12061 A-19299 A-19308 A-04008 A-04020 A-04042 A-12108 A-12120 A-12142 A-04064 A-19314 A-19320 A-19336 A-86913 A-86929 A-86935 4.0 4.3 4.5 4.8 5.0 5.5 6.0 6.4 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 12.0 12.5 12.7 13.0 13.5 14.0 14.3 14.5 15.0 16.0 16.5 17.0 17.5 18.0 19.0 20.0 21.0 21.5 22.0 23.0 24.0 25.0 28.0 30.0 110 160 166 160 166 160 166 200 250 Part No. L (mm) Max. drilling D (mm) depth (mm) 30 mm (1-3/16”) Rotary Hammer Double Insulation Model HR3000C SDS-Plus Note: The standard equipment for the tools shown may differ from country to country. Consult your local Makita catalogue or representative to know the standard equipment for Makita tools sold in your area. Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502, Japan 14 x 250 798389-5 A x L (mm) Part No. • Tungsten-carbide tipped bit • Bull point (For demolishing concrete) L A • Cold chisel (For chipping, edging, channeling and breaking away larger chunks of concrete) L A • Scaling chisel (Wide chisel for chipping away scale or dried concrete spatter) 20 x 250 798388-7 A x L (mm) Part No. L A 38 x 200 50 x 215 A-30483 A-86387 A x L (mm) Part No. • Grooving chisel (For grooving, channeling or removal or heavy scale, especially in narrow or recessed areas) L A 8 x 170 12 x 170 A-86365 A-86371 A x L (mm) Part No. 20 x 170 A-86686 • Core bit Part No. Outer dia. (mm) Max drilling depth (mm) 35 45 54 66 79 180 Overall length 108 mm A-86599 A-86608 A-86614 A-86620 A-86636 • Center bit Part No. 752031-2 • Core bit adapter (with center bit, rod) Part No. A-86642 • Rod (Used to remove core bit) Part No. 256806-6 • Dust cup 6.0~14.5 12.0~16.0 421342-3 421664-1 Bit size (mm) Part No. • Scraper assembly Part No. A-30106 (with cutter) Part No. 343411-9 Continuous rating (lnput) No load speed Tungsten-carbide bit min-1 (rpm) Net weight Capacities Core bit 30 mm (1-3/16") 90 mm (3-1/2") 850 W 360 — 720 Blows per minute 1,650 — 3,300 Overall length 391 mm (15-3/8") 4.6 kg (10.1 lbs) Power supply cord 5 m (16.4 ft.) Part No. 321248-4 Depth gauge 181573-3 Grease vessel 110 g Carrying case 824559-1 PRINTED IN JAPAN Z13941-2 1999-8 It ensures Quick Drilling! Ideal for heavy duty drilling from 18 mm diameter up! OPTIONAL ACCESSORIES SPECIFICATIONS STANDARD EQUIPMENT Core bit assembly Drill chuck assembly • Drill chuck Part No. 122574-2 • Chuck key Part No. 763432-9 D L (Protects operator from dust and debris) Rotation with Hammering Hammering Rotation 3Modes

 Open the catalog to page 1

(Set the pointer at symbol mark.) Rotation with Hammering Rotation Hammering • It is not possible to shift position directly from Rotation to Hammering or Hammering to Rotation. 1. 3 Mode Change Lever Chisel locking at 24 different position. To shift the lever to "Hammering" position. 30mm (1-3/16”) Rotary Hammer Model HR3000C Double Insulation Piston Striker Fully adjustable side handle 2. No Hammering when Idling No Hammering when idling because air in the cylinder is not compressed unless tool is pressed against ground. This function ensures machine's long life. 3. High dust-proof...

 Open the catalog to page 2

All MAKITA catalogs and technical brochures

  1. General catalog

    20 Pages

  2. General catalog

    20 Pages

  3. OSHA catalog

    16 Pages

  4. The accesory book

    152 Pages

  5. Lithium-Ion Book

    100 Pages

  6. Solutions Dust

    12 Pages

  7. Makita DC18RD

    2 Pages

  8. Makita DC18RD

    2 Pages

  9. FS2300

    1 Pages

  10. 4101RH

    1 Pages

  11. DLS714Z

    1 Pages

  12. HP331DWAE

    1 Pages

  13. DHP482RMJ

    1 Pages

  14. catalogue 2013

    108 Pages

  15. UB360DWB

    2 Pages

  16. LXMT025

    2 Pages

  17. LXGC01Z

    2 Pages

  18. Circular Saw

    3 Pages

  19. BUC250, BUC250C

    4 Pages

  20. BUR360, UR360D

    4 Pages

  21. Drill 6411

    2 Pages

Archived catalogs

  1. Angle Cutter

    1 Pages

  2. Angle Grinder

    1 Pages

  3. Metal Cutter

    2 Pages