*mydirectindustry

Catalogs
MAKITA
BHR262, BHR262T, HR262D, HR262TD

BHR262, BHR262T, HR262D, HR262TD

Product catalog summary

Overview: This document provides technical specifications and features of Makita's cordless combination hammers, specifically the BHR262, BHR262T, HR262D, and HR262TD models. These tools are designed for professional use, offering high performance with 36V Lithium-ion batteries and are adapted for SDS-PLUS bits.

Specifications:

Battery Options: Two battery options are available: BL3626 (2.6Ah) and BL3622A (2.2Ah), with fast charging capabilities of 22 minutes and 60 minutes respectively.
Tool Capacity: The tools can drill up to 26mm in concrete, 13mm in steel, and 32mm in wood.
Performance: The tools offer a no-load speed of 0-1,200 rpm and impacts per minute of 0-4,800.
Dimensions and Weight: The BHR262T/HR262TD models measure 387x104x235mm and weigh 4.8kg, while the BHR262/HR262D models measure 363x104x235mm and weigh 4.5kg.

Features:

Vibration Absorbing Handle: Designed to reduce hand fatigue and improve control and comfort.
Three Mode Operation: Available for BHR262T/HR262TD, allowing rotation + hammering, rotation only, and hammering only.
Quick Change Chuck: Facilitates easy bit changes.
LED Job Light: Equipped with preglow and afterglow functions for better visibility.
Torque Limiter: Automatically stops the tool when the drill bit hits reinforcements.
Reversing Switch: Operable with one hand for convenience.
Battery Converter Options: BCV01 and BCV02 allow the use of two 18V batteries to power 36V tools.

Performance Comparison:

The document includes charts comparing drilling efficiency against competitors and predecessor models, indicating superior performance of the BHR262 and BHR262T models.

Standard Equipment: Includes a fast charger, battery cartridge, depth gauge, and side grip. Note that the tool does not come with a bit.

Catalog excerpts

26mm (1") Satisfy Professional's Needs Cordless Combination Hammer BHR262, BHR262T 36V-2.6Ah HR262D, HR262TD 36V-2.2Ah Quick change chuck Quick change chuck Adapted for SDS-PLUS bits Photo : BHR262 Tool does not come with bit. Further evolution of Makita’s Cordless Hammer Battery BL3626 2.6Ah Fast Charging 22min. Battery BL3622A 2.2Ah Photo : HR262D with Battery fuel gauge

Open the catalog to page 1

Outstanding performance with 36V Lithium-ion battery Comparison of Drilling Efficiency Bit diameter: 16.5mm 150 BHR262/T Faster 100 24V Predecessor Model Slow Fast Test conditions: Drilled in concrete with compressive strength of 40N/mm2. Note: 1. It may differ under some conditions. 2. Numbers in the charts above are relative values when the capacity of Predecessor Model is indexed at 100. Vibration absorbing Handle and Good tool-balance provide more control and comfort while minimizing hand fatigue. The center of gravity closer to handle reduces weighs the burden that the tool front weighs....

Open the catalog to page 2

Dust cup (option) can be attached using adapter. (for BHR262/ HR262D only) Adapted for SDS-PLUS bits Torque limiter When drill bit hits against reinforcements, Torque limiter operates to stop. Variable speed control switch Reversing switch operable by one hand One-touch sliding chuck for easy bit changes Anti-slip rubberized soft grip Chisel rotates full 360 degrees with 40 different locking positions. LED job light with preglow and afterglow functions On pulling switch trigger, the light automatically turns on before motor starts turning. keeps on illuminating about 12-13 sec. after trigger...

Open the catalog to page 3

Battery Converter Battery Converter Battery Adapter BCV01 (option) BCV02 (option) BAP36N (option) Users, who have 2 units of 18V battery (BL1830), can make use of 36V cordless tools with BCV01. Users, who have 2 units of 18V battery (BL1830), can make use of 36V cordless tools with BCV02. enables to separate the battery from the tool to reduce the tool weight for less hand and arm fatigue. 18V x 2 for tools powered by two 18V batteries 18V x 2 for tools powered by two 18V batteries with Battery fuel gauge 36V for tools powered by a 36V battery with Battery fuel gauge Comparison of Drilling Efficiency...

Open the catalog to page 4

All MAKITA catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list