16-Port 10G DIN-Rail Layer 3 TSN Industrial Ethernet Switch • Support 4*10G SFP+ ports, 4*Gigabit SFP ports and 8*Gigabit RJ45 copper ports • Support TSN Time sensitive Networking series standards (IEEE802.1AS/ Qbv/ Qbu/ CB/ Qci), provide clock synchronization, low-latency flow control and reliability mechanisms • Support fast ring networking (MW-Ringv2), ERPSv1/v2, STP/RTSP/MSTP to improve network reliability • Support IPv4/IPv6 static routing, RIPv1/v2, OSPF dynamic routing protocol, realize routing and forwarding • Supports 1 *AC85~264V / DC110~370V AC/DC power input, or 2*DC24V or DC48 power input optional, dual power supply redundancy • High strength aluminum alloy shell, IP40 protection, fanless design for heat dissipation, can reliably work in harsh industrial environments of-40 °C~+75 °C ^ Product Description MISCOM8216TSN-4XGF-4GF-8GT layer-3 10G TSN industrial Ethernet switch, can be transmitted low latency in data flow with reliability and certainty, supports 4*10G SFP+ ports, 4*Gigabit SFP ports, and 8*Gigabit RJ45 ports. It adopts the storage and forwarding mechanism and has strong bandwidth processing capabilities, automatically troubleshooting data packet errors, reducing transmission failures, and easily supporting 10G networking to ensure stable, reliable, and efficient data transmission. The product uses industrial grade components, combined with high standard system design and production control, with easy installation on 35mm DIN rails. It has high strength durable aluminum alloy shell, fanless efficient heat dissipation, -40oC ~ + 70oC wide temperature work, high standard industrial protection design, can adapt to a variety of harsh working environment, stable communication performance. The MISCOM8216TSN-4XGF-4GF-8GT layer-3 switch follows the main communication standards in the industrial Future-Ready Communication

field, and meets the technical requirements such as real-time communication, network security and so on. The product provides various ways of managing switches, such as accessing the switch command line (CLI) through the CONSOLE port or TELNET/SSH protocol, the switch WEB interface through HTTP / HTTPS, and the device MIB through the SNMP protocol. Multiple network protocols and industry standards, such as TSN, PTP, RIP, OSPF, VRRP, ERPS, MW-Ringv2, STP/RSTP/MSTP, VLAN, QoS, LACP, PIM, IGMP, IGMP Snooping, LLDP, 802.1X, ACL, RMON, DHCP Client/Server/Snooping/Relay, SNTP, port mirroring, DDM,...

• Support unicast frame, broadcast frame and unknown storm control, support broadcast and multicast packet storm detection to prevent network storm • Support link static aggregation and dynamic aggregation LACP, which can increase transmission bandwidth, improve link reliability and realize network load sharing • Support 802.1Q VLAN, provide Access, Trunk, Hybrid interface easy to divide multiple broadcast domain, enhance the security of the network • Support MAC, protocol, and IP sub-network based VLAN • Support MAC address table and aging time limit, static unitcast/multicast MAC address and...

• Support DHCPv4 snooping, ensure that DHCP clients obtain IP addresses from a legitimate DHCP server to prevent DHCP attacks • Support DHCPv4 relay to assist DHCP server to dynamically assign network parameters to DHCP clients • Support system logging for user operation, system security, system failure and other information, and support remote monitoring of Syslog server Future-Ready Communication

Future-Ready Communication

Future-Ready Communication

Future-Ready Communication

Future-Ready Communication

Standard Model WUHAN MAISVCH TECHNOLOGY CO.,LTD Address: No. 079, Room 501, Chuangxinghui Free Trade Finance Building, No.777 Optical Valley 3rd Road, East Lake High-tech Development Zone, Wuhan, Hubei, China. Mail: [email protected] Official site: www.maisvch.com Copyright© Maisvch Communication All rights reserved Future-Ready Communication