MIAP7102G-Exi-2N25 2-Port Gigabit Dual Frequency Wi-Fi 6 Embedded Intrinsic Safety Industrial Wireless AP ⚫ Support 1 Gigabit WAN port (SFP or RJ45), 1 Gigabit LAN port (RJ45) and 2 2.4GHz/5GHz antenna interfaces Support Wi-Fi 6 dual frequency wireless LAN, support OFDMA+MU-MIMO technology Support five working modes: routing, AP, relay, bridging, and client, to meet different application scenarios Support Wi-Fi Mesh and wired Mesh self-organizing network functions Support functions of fast roaming, quick discovery, automatic synchronization, network management, and batch upgrading under AC control Support IPv6 services and can access IPv6 network. This device and the connected terminal devices can automatically obtain IPv6 addresses Support advanced settings such as short protection time interval, segmented threshold, RTS threshold, pure G mode, pure 11N mode, etc Support firewall and service functions such as port forwarding, IP/MAC/domain filtering, NAT translation, DMZ, intranet penetration, DDNS, VPN, SNMP, LLDP, etc Support DC12~24V power input and comply with intrinsic safety circuit design standards Support working temperature range from -40 ℃ to+75 ℃, meeting

Product Introduction The MIAP7102G-Exe-2N25 series is a 2-port gigabit dual frequency Wi-Fi 6 embedded intrinsic safety industrial wireless AP designed and developed specifically for industrial communication network applications, with a dual frequency concurrent speed of up to 2976Mbps. This series of products offers multiple types of interfaces, including 1 Gigabit WAN port, 1 Gigabit LAN port, and 2 2.4GHz/5GHz antennas. The WAN port supports Gigabit SFP port or Gigabit copper ports, while the antenna supports IPEX 1st generation board end antenna sockets or SMA-K (external thread internal...

• Support OFDMA+MU-MIMO technology, providing multiple concurrent channels in frequency domain and physical space, improving multi-user high-density access • Support Wi-Fi 6 dual frequency wireless LAN, with a theoretical maximum speed of 574Mbps for 2.4G and 2402Mbps for 5G • Support routing mode and can connect to the external network through dynamic/static/PPPoE dial-up, enabling wired and wireless terminal networking • Support AP mode, can convert wired network to wireless network, realize wireless terminal access to wired network, AC controllable • Support relay mode, can amplify the upper-level...

protocols such as PPTP, L2TP, and IPSec • Support SNMP v1/v2c and SNMP Trap, allowing for information query, modification, and troubleshooting through MIB, achieving centralized management • Support LLDP, obtain LLDP neighbor device information, monitor link status, facilitate topology management and fault location • Support enhanced roaming in client mode to achieve seamless and fast roaming, effectively ensuring real-time data transmission and improving the reliability of wireless networks • Support DDM digital diagnostic monitoring, which can monitor the working temperature, voltage, current,...

Future-Ready Communication

Future-Ready Communication

Full Load Power Consumption Future-Ready Communication

Installation Dimensions Unit:mm Future-Ready Communication

WUHAN MAISVCH TECHNOLOGY CO.,LTD Address: No. 079, Room 501, Chuangxinghui Free Trade Finance Building, No.777 Optical Valley 3rd Road, East Lake High-tech Development Zone, Wuhan, Hubei, China. Mail: [email protected] Official site: www.maisvch.com Copyright © Maisvch Communication All rights reserved Future-Ready Communication