TOCH SYS -CENTRALIZED SYSTEM
5Pages

TOUCH SYS CENTRAL ELECTRICAL BOX FOR LOADING CONTROL Complete electronic system with full logic microprocessor for managing the loading system with touch screen panel. Full touch-screen panel with a special color graphic design for an easy set-up of machine paramethers. Touch sys control panel is complete with: • Lamp to visualize alarm / Acoustic alert alarm • Panel color graphics 5 " -10" - 15" Touch-Screen • Dedicated software for the management loading sistem • Specific logic for customized installation; colour graphic visualization of the installation. Complete power management unit...

POTENTIALITY OF THE CONTROL"Touch-Sys" Main Tech Ttypology of control and communication: Central control with PLC SERVER that communicate with some modules PLC SLAVE mounted on machineries and objects to control. The communication between the PLC SERVER and the modules PLC SLAVE is made by a serial wiring RS485 with communication protocol MOD BUS. The multipoles serial wiring brings, moreover, the feeding in 24 VDC to all communication modules mounted on the machineries. The main advantage is an only wiring to ground and connect reducing the mounting cost Modular and open system: It means...

POTENTIALITY OF THE CONTROL"Touch-Sys" Main Tech Typology of control and communication: Central control with PLC SERVER that communicate with some modules PLC SLAVE mounted on machineries and objects to control. The communication between the PLC SERVER and the modules PLC SLAVE is made by a serial wiring RS485 with communication protocol MOD BUS. The multipoles serial wiring brings, moreover, the feeding in 24 VDC to all communication modules mounted on the machineries. The main advantage is an only wiring to ground and connect reducing the mounting cost Modular and open system: It means...

Supervisor Software module for the monotoring of the IMM cycles . This software module to install on a customer PC enables of monitoring the working cycles of the IMM; permits of having all the following functions: • Possibility of setting the IMM number/Possibility of setting the number or name of the mould. • Possibility of setting the product description and the production start date/end date. • Possibility of setting the number of pieces for mould (in order to have an automatic counter). • IMM Time cycle reading / Monitoring of the IMM cycle time always calculating the average. • Alarms...